How to repair UV flatbed printers to save money?

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

The production process of the digital offset heat transfer and powder-shaking machine is greatly simplified, and the effect of powder-shaking is excellent.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

A3 DTF Printer, Our Latest A3DTF Printer is Officially Released. Direct to Film printing, or DTF, is a new technology that allows users to print designs onto special films. And then do heat transfer in any fabric，A very good way to do for every craft and DIY.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

Hotsale A3 DTF printer:
* 2 XP600 printheads support fluoresent ink printing
* Fast speed, can each to 5 sqm/h (6 hours can finish one 100m roll film)
* Support vent holes solution,keep the garment breathable function after transfered
* No limit of fabrics

You can print on AGP paper Glitter Gold DTF Film directly with your existing DTF printer and DTF ink, without changing any consumable or DTF printer setting. This Glitter Gold DTF Film works on T-shirts, bags, shoes, socks and other materials, provides you intense sparkle and shine to your prints. The new product has the advantages of glitter Gold effect, high ink absorption, no ink-bleeding, easy peel, and washable.

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

use:
1. Heat transfer printing
2. Making printing glue
3. Screen printing

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

Printing and dyeing of all fiber fabrics, including pure cotton, rayon, linen, modal, wool, silk and other protein fibers; polyester, nylon, acrylic and other chemical fibers and other blended products.
Specifically used in pure cotton fabrics, garments, T-shirts, cut pieces, decorative fabrics, wall coverings, curtains, fabric sofas, bedding.

Thermal transfer heat transfer has a wide range of uses, a wide variety of processes, and the effects are constantly updated. The names are different, also called hot stamping, transfer printing, etc.

Pure black when printing is generally used for smaller characters. If the full-color black (C100 M100 Y100 K100) is used, the ink concentration is too high, the ink is not easy to dry and easy to print. Therefore, it is recommended to use monochrome black (C0 M0 Y0 K100).

A Comprehensive Guide to Identifying and Selecting Quality PET Film
In the dynamic world of Direct-to-Film (DTF) printing, the quality of your PET film serves as a linchpin in the pursuit of exceptional results. To empower your printing journey, it’s vital to delve into the nuances of identifying and selecting top-notch PET film. Here’s an extensive guide brimming with valuable insights to navigate this critical aspect of DTF printing:
Tip 1: Vibrant Color Saturation Achieving stunning colors starts with top-notch ink and a professional ICC profile. Opt for a DTF film boasting a superior ink-absorb coating layer for optimal compatibility between ink and film.
Tip 2: Precision in Printing Address issues like holes, especially in black-colored prints. Choose a high-quality DTF film to enhance the precision of your prints and mitigate potential problems.

Good chemical stability, can be stored at room temperature for a long time without deterioration.

1. The curing speed of uv ink is affected by the color
2. Concentration control of black uv ink is very important
3. The viscosity of uv ink varies greatly with temperature
4. The gloss of uv ink is lower than that of oil-based ink
5. Can’t reproduce intermediate colors in uv ink

DTF Features:
1. Free edition, fast printing speed, low cost, instant, low power consumption, breaking the limitations of traditional color printing production, can print any type.
2. The integrated design of printing white + color composite process reduces the printing cost of the darkest fabric and increases the production capacity.
3. The machine has the function of skipping white, which can save more time for users.
4. The built-in software can be used for printing emergency, and the pause function can wait for the problem to be solved before printing, which avoids the user’s property loss.

Product attribute introduction: UV ink printing transfer sticker, suitable for hard surface, plane, curved surface and other objects

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

A3 DTF Pro textile printer is widely used for different products, for example T-shirt, hats, shoes, bags. It requires a DTF printer, a shake powder machine and a heat press to get final products. Since it is cost effective, small size and environmentally friendly, customers who want to start new business are very interested in it.

When the UV flatbed printer nozzle is used for a long time, it is easy to ink on the surface area. If left alone, after a long time, the nozzle will easily become clogged. There are generally five causes of this phenomenon. Depending on the design of the UV flatbed printer from different manufacturers, there may be 7 or 4 phenomenon, but mastering these five can basically solve more than 90% of the ink accumulation problem.