TODOjet A1 DTF Printer Machine 60cm T-shirt printing machine best quality best price for sale

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

1. More choices on dark colored fabric
2. Reducing your production cost
3. Better print out on performance
4. Environmental friendly

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

Many factors will affect the printing accuracy of the uv printer. For example, the pixel of the pattern, the higher the pixel, the clearer and better the printed pattern; The size of the nozzle of the nozzle;The smaller the nozzle, the smaller the ink droplets and the better;The software technology level of the manufacturer, the higher the level, the better the color printing effect.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

Main products of TODOjet
DTF Printer and DTF Powder Oven (A3,60cm,120cm size) Widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc.

UV Flatbed Printer (3050,6040,UV6090,UV1350) Widely used in textile, plastic sheet, metal plate, acrylic sheet, wood board, leather, glass, phone case, ceramic tile, etc.

All kind of consumables for DTF solution DTF powder, DTF ink, DTF film, UV ink, UV AB film, etc

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

The production of heat transfer clothing is a hot project that has only emerged in recent years, which is heat transfer technology. Thermal transfer heat transfer technology has a wide range of market applications, widely used in clothing, T-shirts, luggage, handbags, shoes and hats, socks, gloves, aprons, handicrafts and other fields. Production of heat transfer, high elasticity, good washing fastness, brilliant color.

DTF textile printing ink is highly compatible with Epson xp600 print head. You can directly print your designs on different textiles and fabrics using Direct to Film Ink technology.There is front and rear heating, auto ink supply, white ink circulating and stirring.

Each digital inkjet printer comes in a similar way: a print head.All component print heads for small or large formate inkjet printers, printing ink on all different types of media.The inkjet print heads spray the ink onto paper or other media in a controlled way to provide the desired image. Our TODOjet printesr usually use the Epson F1080 and Epson i3200 printhead.

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

A Comprehensive Guide to Identifying and Selecting Quality PET Film
In the dynamic world of Direct-to-Film (DTF) printing, the quality of your PET film serves as a linchpin in the pursuit of exceptional results. To empower your printing journey, it’s vital to delve into the nuances of identifying and selecting top-notch PET film. Here’s an extensive guide brimming with valuable insights to navigate this critical aspect of DTF printing:
Tip 1: Vibrant Color Saturation Achieving stunning colors starts with top-notch ink and a professional ICC profile. Opt for a DTF film boasting a superior ink-absorb coating layer for optimal compatibility between ink and film.
Tip 2: Precision in Printing Address issues like holes, especially in black-colored prints. Choose a high-quality DTF film to enhance the precision of your prints and mitigate potential problems.

RGB color model refers to the three primary colors of light: Red, Green, and Blue,the three primary color light with different proportions of the sum, can produce a variety of color light, in theory, red, green, blue light can be mixed out of all colors.

UV printing is a unique method of digital printing utilising ultraviolet (UV) light to dry or cure ink, adhesives or coatings almost as soon as it’s hit the paper, or aluminium, foam board or acrylic – in fact, as long as it fits in the printer, the technique can be used to print on almost anything. UV ink is not poisonous. Although UV ink curing is not poisonous, but not completely harmless. Because UV ink still has certain irritation and corrosive to the skin. But if you choose a green UV ink, you can avoid this situation.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

When something temporarily leaves for a short time and no longer operates, the UV flatbed printer is set to the standby state, and the x-axis and y-axis are also static. If the x-axis carriage movement is found, it means that the fiber cable is damaged or loose.

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

TODOjet UV Film has good adhesion, good smoothness and high brightness. Insoluble colorful powder, luminous powder, strong yellowing resistance, good folding resistance and adhesion, excellent printing adaptability, good leveling and defoaming.

Environmentally friendly, no waste, small footprint, unlimited fabrics, soft and washable, suitable for personalized heat transfer customization and batch automated production of various fabrics.

High quality DTF shaker powder shaking dryer, usually together for XP600/4720/i3200 DTF printer or other DTF printing machine. Mainly used for hot melt dusting and curing during printing. We have different powder shaking machine can meet your different printing speed like 2 head printer powder shaker and 4 heads printer powder shaker.

Inkjet technology utilizes tiny droplets of ink to facilitate direct printing without the device coming into contact with the printing surface. Because the technology supports non-contact printing, it can be applied to a variety of media and is now being introduced into a wide range of fields from general-purpose to industrial.

Why choose us
1. Good materials are more resistant to corrosion
2. High viscosity, more firm and not easy to fall off
3. Good waterproof performance
4. High wear resistance, good quality, not easy to scratch

Original i3200 pinthead i3200 A1 E1 U1 head for Eco Solvent Sublimation Water-Based UV inkjet printer
1. Product Name: i3200 head
2. To be used for : Printer with sublimation ink,. textile printer
3. Weight: 0.3kg
4. Print nozzle qty: 3200 pcs