uv printer wood

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

The fault of the uv flatbed printer software driver host engine is manifested in four aspects: host system fault, software damage, abnormal drive, and map software fault, all of which will directly cause the device to fail to print normally.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

When something temporarily leaves for a short time and no longer operates, the UV flatbed printer is set to the standby state, and the x-axis and y-axis are also static. If the x-axis carriage movement is found, it means that the fiber cable is damaged or loose.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

UV flatbed printer UV lamp belongs to one of the core components of the device. Its main function is to ensure that the UV ink adheres to the pattern surface and can be dried quickly and completely to prevent the pattern from discoloring and falling off. During long-term use, whether it is natural aging of parts or improper manual operation, it will cause fault. There are four common faults: the uv lamp is dimmed, the uv lamp is not off, the uv lamp is not on, and the uv lamp has a wrong lighting distance.

Type:Inkjet Printer
Condition:New
Place of Origin:Henan, China
Usage:Paper Printer, Label Printer, Card Printer, Tube Printer
Color & Page:Multicolor
Dimensions(L*W*H):5300*1330*1700mm
Warranty:1 Year
Ink Type:UV Ink
Marketing Type:New Product 2022

DM-320UV-Gen5 works with 2-8pcs Ricoh Gen5 heads. It’s a high performance industrial 3.2m UV roll to roll printer, gray scale printing, intelligent feather printing technology, 3D effect and varnish effect, it’s widely used in soft film, pvc film, leather, wall cloth and all kinds of indoor decoration and outdoor advertising.

Novo proceso de impresión O novo esquema de impresión característico de Domax, a impresión de logotipos anti-falsificación oculto, a impresión de sombreado en papel de tarxeta prata, a impresión de vidro transparente e outras características de impresión.

Visas sprauslas ir uzstādītas 0,1–0,02 mm zemāk nekā sprauslas apakšējā plāksne, un pretsadursmes plāksne ir aptuveni 0,5 mm augstāka nekā sprauslas apakšējā plāksne. Tajā pašā laikā galviņas kariete ir aprīkota ar augstas jutības sadursmes sensoru, kas aizsargā drukas galviņu un nodrošina, ka drukas galviņa netiks bojāta nejauša trieciena rezultātā drukas procesa laikā.

UVインク：輸入UVインクを使用しており、スプレー直後に乾燥し、耐印刷性に優れています。 ノズル制御、エコソルベントインク印刷制御、色硬化強度、メディア伝送精度などの技術的な問題に関して、信頼できる技術的保証が得られています。