UV AB Film dtf film vinyl cold release no heating no shaking AB transfer film transfer films uv for UV Printer

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

Easy to use, tear and paste, UV printing, good color reproduction, meet the needs of the project, environmental protection, waterproof and wear-resistant, high-temperature resistance,colorful, Golden glossy surface and good 3D texture, simple operation, easy to paste, can paste any material (except fabric).

1. A variety of fabric printing to meet your needs
2. All fabrics such as knitted, textile, nylon, non-woven, Oxford cloth can be hot stamped
3. You can easily achieve photo-level effects

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

Why choose us
1. Good materials are more resistant to corrosion
2. High viscosity, more firm and not easy to fall off
3. Good waterproof performance
4. High wear resistance, good quality, not easy to scratch

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

Each digital inkjet printer comes in a similar way: a print head.All component print heads for small or large formate inkjet printers, printing ink on all different types of media.The inkjet print heads spray the ink onto paper or other media in a controlled way to provide the desired image. Our TODOjet printesr usually use the Epson F1080 and Epson i3200 printhead.

PET detached film is a material commonly used in thermal transfer printing, the substrate is PET, after being coated with silicone oil, so it is also called silicone oil film.There are hot peel and cool peel . After anti-static and anti-scratch treatment, the product has a very good adsorption and fit.

When the UV flatbed printer nozzle is used for a long time, it is easy to ink on the surface area. If left alone, after a long time, the nozzle will easily become clogged. There are generally five causes of this phenomenon. Depending on the design of the UV flatbed printer from different manufacturers, there may be 7 or 4 phenomenon, but mastering these five can basically solve more than 90% of the ink accumulation problem.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

TODOjet is a professional DTF printer supplier,we can also offer you one stop solution with related consumables, such as pigment ink, pet film, powder machine,and hot melt powder etc.If you have good quantity,we can offer you wholesale price.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

Product attribute introduction: UV ink printing transfer sticker, suitable for hard surface, plane, curved surface and other objects

DTF PET film with different size for your reference, 30cm*100m/roll and 60cm*100m/roll. This anti-static PET film for cold peel, it can feed continously during printing.Meanwhile, we can also offer other DTF printer consumbles like hot melt powder and pigment ink.

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

UV flatbed printer UV lamp belongs to one of the core components of the device. Its main function is to ensure that the UV ink adheres to the pattern surface and can be dried quickly and completely to prevent the pattern from discoloring and falling off. During long-term use, whether it is natural aging of parts or improper manual operation, it will cause fault. There are four common faults: the uv lamp is dimmed, the uv lamp is not off, the uv lamp is not on, and the uv lamp has a wrong lighting distance.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

The production of heat transfer clothing is a hot project that has only emerged in recent years, which is heat transfer technology. Thermal transfer heat transfer technology has a wide range of market applications, widely used in clothing, T-shirts, luggage, handbags, shoes and hats, socks, gloves, aprons, handicrafts and other fields. Production of heat transfer, high elasticity, good washing fastness, brilliant color.

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system