Hot in Turkey Large Format Sublimation Heat Press Machine,Big Size Heat Press For Sale

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

Full series large format powder shaking machine, from 60cm to 120cm size, can match with your large format DTF printer well. This powder curing machine also with take-up system. Fast speed can match both 2 heads or 4 heads printer.

UV printing is a unique method of digital printing utilising ultraviolet (UV) light to dry or cure ink, adhesives or coatings almost as soon as it’s hit the paper, or aluminium, foam board or acrylic – in fact, as long as it fits in the printer, the technique can be used to print on almost anything. UV ink is not poisonous. Although UV ink curing is not poisonous, but not completely harmless. Because UV ink still has certain irritation and corrosive to the skin. But if you choose a green UV ink, you can avoid this situation.

Many factors will affect the printing accuracy of the uv printer. For example, the pixel of the pattern, the higher the pixel, the clearer and better the printed pattern; The size of the nozzle of the nozzle;The smaller the nozzle, the smaller the ink droplets and the better;The software technology level of the manufacturer, the higher the level, the better the color printing effect.

UV AB Film material is waterproof and high temperature resistant, wear-resistant and scratch-resistant for daily use, bright color and clear details
UV Ink is low-odor, non-toxic, safe and secure, smooth printing without blocking the nozzle, rich

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

Although UV printer can print patterns on the surface of hundreds of materials or thousands of materials, due to the differences in the characteristics of the surface of different materials, the adhesion of UV ink, and flexibility, some materials will peel off and peel off Situation, this requires UV coating primer to solve this problem.

White Ink Heat Transfer Scheme>>
Bai Caitong comes out with an environmentally friendly paint scheme, which is a subversive heat transfer process.
It solves the problem that the direct-injection printing process is picky about fabrics, and the new heat transfer is not limited to material transfer.

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

1. A variety of fabric printing to meet your needs
2. All fabrics such as knitted, textile, nylon, non-woven, Oxford cloth can be hot stamped
3. You can easily achieve photo-level effects

Our DTF ink (aka Direct to Film ink) has been carefully selected and tested, and our DTF ink manufacturing partners carefully scrutinized to ensure the quality standards in ink production and consistency.for Black, Cyan, Magenta, Yellow and White; The DTF ink / transfers can be transferred to a variety of textiles and fabrics (cotton, polyester and more) as well as other substrates. Although all our DTF inks will work on a variety of engines, we also offer the desktopDTF and wideDTF ink series that are formulated for a more specific set of printheads / printer engines.

We all know that the custom production of T-shirts is usually the heat transfer process. Heat transfer is to print the pattern on the heat transfer paper first, and then cover the printed product on the T-shirt after printing, and put it into the heat transfer machine ( Heat press machine) heat and pressurize for a few seconds, and the pattern is transferred to the T-shirt.

Pre-sale: With senior industry experience, analyze customer needs and future development, and customize the overall solution of recommended products and machines

Factory delivery: provide technical guidance ink/powder/heat transfer film offset heat transfer printer one-stop supply,Use the special paint ink for transfer film to print the pattern on the PET film, directly remove dust, no need to cut, no need to discharge waste, and the fast transfer of natural hollowing is suitable for any fabric.

DTF Features:
1. Free edition, fast printing speed, low cost, instant, low power consumption, breaking the limitations of traditional color printing production, can print any type.
2. The integrated design of printing white + color composite process reduces the printing cost of the darkest fabric and increases the production capacity.
3. The machine has the function of skipping white, which can save more time for users.
4. The built-in software can be used for printing emergency, and the pause function can wait for the problem to be solved before printing, which avoids the user’s property loss.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

Heavy-duty pinch roller: thickened pinch roller and high elastic spring effectively ensure the accuracy and stability of printing paper
Powder Shaking Device: Shaking powder is clean and free of residue
High-performance income and expenditure device: the paper film is better preserved, not easily deformed, and adapts to a variety of materials

1,Rail maintenance
2,Platform maintenance
3,Damper replacement
4,capping Replacement

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

TODOjet 60cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and better after-sale service. We also offer wholesale price and OEM service.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?