Why the UV flatbed printer print head occur heating does not heat up?

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

White ink timing stirring function, every 30 minutes, the machine will automatically stir the white ink to prevent precipitation (automatic, no manual operation required)

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

When the UV flatbed printer nozzle is used for a long time, it is easy to ink on the surface area. If left alone, after a long time, the nozzle will easily become clogged. There are generally five causes of this phenomenon. Depending on the design of the UV flatbed printer from different manufacturers, there may be 7 or 4 phenomenon, but mastering these five can basically solve more than 90% of the ink accumulation problem.

The advantage of white ink heat transfer is that it can transfer high-precision pictures and other colorful pattern designs. The actual effect is quite close to the computer hand-painted manuscript. The lack of part: if you touch it hard, you will feel a strong sense of collagen fibers, and the ventilation effect is not good. If you only do simple pattern decoration design for clothing products, bags, and pillows, then you don’t need to consider the ventilation problem.

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

1. Source manufacturer, free proofing, lifetime maintenance
2. Personalized customization, unlimited fabrics, suitable for pasting in various shapes
3. Simple operation, Liyin Lidry, one-time molding

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Garment printers can print on various rolls or sheets of materials, such as: thermal transfer film, film, self-adhesive, PU film, etc. At present, the most popular application is in the clothing industry.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

UV printing is one of the most flexible and exciting print processes ever created, and its uses are almost limitless. For regular object, UV Printing is so convenient. But for irregular object, there are some problems, the AB film solution  is  suitable  for these irregular object and you can also develop a new market of label printing industry. Its just expand the application of UV flatbed printer.

Good chemical stability, can be stored at room temperature for a long time without deterioration.

Original i3200 pinthead i3200 A1 E1 U1 head for Eco Solvent Sublimation Water-Based UV inkjet printer
1. Product Name: i3200 head
2. To be used for : Printer with sublimation ink,. textile printer
3. Weight: 0.3kg
4. Print nozzle qty: 3200 pcs

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

TODOjet UV ink is formulated to produce vibrant colors using Cyan, Magenta, Yellow, Black, White, and Varnish.
Combined, this UV inkjet ink enables companies to achieve full-color graphics and images on a wide variety of flat and cylindrical objects.

TODOjet UV ink can be used in practically any UV printers.

Adheres to a wide variety of rigid substrates including glass, plastic, and metal

CMYK + W + V available

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

The heat press machine can heat various heat presses on cotton, linen, chemical fiber and other fabrics by heat transfer, and can also perform heat treatment processes such as screen printing, mucilage, foaming, etc. Landscape patterns, etc. are baked on porcelain plates and metal plates, which are especially suitable for making medals, commemorative cards, cultural shirts, etc. It is economical and practical, and the patterns are exquisite. It is replacing traditional embroidery and screen printing, and the cost and effect are much lower and better than general embroidery and multi-color screen printing.

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

Wi-Fi wireless printing, place it wherever you want, support Epson iPrint to realize a variety of printing applications, and easily share. Support Email Print: You can set an email address for the printer, send Email to the printer, and then print.

Platform upgrade: precision CNC aluminum alloy mute guide rail, lengthened stainless steel heating printing platform, printing film is more stable and does not arch film
Simple operation panel: simple operation, Chinese and English system keys, one-key cleaning of the nozzle and ink loading is more convenient, effectively improving work efficiency