Polyester Sublimation Copolyester Hot Melt Adhesive Powder For Heat Transfer

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

The heat press machine can heat various heat presses on cotton, linen, chemical fiber and other fabrics by heat transfer, and can also perform heat treatment processes such as screen printing, mucilage, foaming, etc. Landscape patterns, etc. are baked on porcelain plates and metal plates, which are especially suitable for making medals, commemorative cards, cultural shirts, etc. It is economical and practical, and the patterns are exquisite. It is replacing traditional embroidery and screen printing, and the cost and effect are much lower and better than general embroidery and multi-color screen printing.

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

A Comprehensive Guide to Identifying and Selecting Quality PET Film
In the dynamic world of Direct-to-Film (DTF) printing, the quality of your PET film serves as a linchpin in the pursuit of exceptional results. To empower your printing journey, it’s vital to delve into the nuances of identifying and selecting top-notch PET film. Here’s an extensive guide brimming with valuable insights to navigate this critical aspect of DTF printing:
Tip 1: Vibrant Color Saturation Achieving stunning colors starts with top-notch ink and a professional ICC profile. Opt for a DTF film boasting a superior ink-absorb coating layer for optimal compatibility between ink and film.
Tip 2: Precision in Printing Address issues like holes, especially in black-colored prints. Choose a high-quality DTF film to enhance the precision of your prints and mitigate potential problems.

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

Heat transfer printing: For the embodiment of details, it is required that the white color of the printer be accurately aligned. Under normal printing speed of 6pas bidirectional printing, the printing accuracy should be high. We can print and heat transfer down to 0.3 mm at a speed of 24 meters per hour. of thin lines.

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

UV Curable Varnish UV Primer Liquid For UV Flatbed Printer machine varnish coating for phone case acrylic glass wood

TODOjet 60cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and better after-sale service. We also offer wholesale price and OEM service.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

Inkjet technology utilizes tiny droplets of ink to facilitate direct printing without the device coming into contact with the printing surface. Because the technology supports non-contact printing, it can be applied to a variety of media and is now being introduced into a wide range of fields from general-purpose to industrial.

You need more than a DTF printer, you need an experienced supplier with satisfactory after-sales service in the field to build your brand and grow your profits. Let Todojet help you achieve business success.Latest technology of A3 DTF Printer ,Todojet DTF Printer is equipped with PET film

According to the shape and function of the ironing board: flat pressing machine (mainly used for the collection of sizes and specifications of clothing and apparel fabrics).

use:
1. Heat transfer printing
2. Making printing glue
3. Screen printing

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

Easy to use, tear and paste, UV printing, good color reproduction, meet the needs of the project, environmental protection, waterproof and wear-resistant, high-temperature resistance,colorful, Golden glossy surface and good 3D texture, simple operation, easy to paste, can paste any material (except fabric).

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer.

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

A new generation of intelligent white ink direct-injection transfer machine, which is cleaner to shake powder, eliminates static electricity, heats up and down, does not regain moisture when returning to the south, and adds suction to the front plate, and paper does not go astray. It has eight characteristics.

It can be used to produce composite laser cardboard, transfer laser cardboard, uv laser decorative materials, and it is the carrier of laser holographic images.