Personalized custom autumn and winter sweater heat transfer printer dark denim underwear T-shirt printing printer

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

Laser film is a high-tech and environmentally friendly new material developed at the beginning of this century. It can be used to produce composite laser cardboard and transfer laser cardboard through a special production process.

1. The curing speed of uv ink is affected by the color
2. Concentration control of black uv ink is very important
3. The viscosity of uv ink varies greatly with temperature
4. The gloss of uv ink is lower than that of oil-based ink
5. Can’t reproduce intermediate colors in uv ink

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

This neutral ink was created to enable printing on items such as coolers and plastic bottles without cracking or distorting the image. This type is available for all of TODOJet ’ UV printers, including Cyan, Magenta, Yellow, Black, White, and Varnish.
Full CMYKWW+V color range
High durability

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

The production process of the digital offset heat transfer and powder-shaking machine is greatly simplified, and the effect of powder-shaking is excellent.

UV AB Film material is waterproof and high temperature resistant, wear-resistant and scratch-resistant for daily use, bright color and clear details
UV Ink is low-odor, non-toxic, safe and secure, smooth printing without blocking the nozzle, rich

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

Advantages
1.With timing function, automatic sound &light alarm after completion
2.With lock catch and sealing strip
3.Excellent heat preservation
4.Rapid temperature rise
5.Up to 6 heating tubes
6.Ensure that every corner of the full width can melt
7.It makes the image quality and firmness transferred to the fabric better

Easy to use, tear and paste, UV printing, good color reproduction, meet the needs of the project, environmental protection, waterproof and wear-resistant, high-temperature resistance,colorful, Golden glossy surface and good 3D texture, simple operation, easy to paste, can paste any material (except fabric).

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads 4720/i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

Easy to operate, compact and convenient, small area does not take up space, and the outside is pleasing to the eye!

Full series large format powder shaking machine, from 60cm to 120cm size, can match with your large format DTF printer well. This powder curing machine also with take-up system. Fast speed can match both 2 heads or 4 heads printer.

TODOjet DTF printer can offer related consumbles like hot melt powder machine,relased PET film and hot melt powder. Transfer PET film with 30cm*100m and 60cm*100m size. Hot melt powder with good adhesive effect,we have white melt powder and black melt powder for option. As to inks, we can offer high quality white pigment ink, cyan pigment ink, magenta pigment ink, yellow pigment ink, and also fluorecent color ink like fluorecent orange and fluorecent green.
As professional DTF printer manufacturer, we not only offer the machines, also offer you full solutions.

Thermal transfer heat transfer has a wide range of uses, a wide variety of processes, and the effects are constantly updated. The names are different, also called hot stamping, transfer printing, etc.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

DTF Features:
1. Free edition, fast printing speed, low cost, instant, low power consumption, breaking the limitations of traditional color printing production, can print any type.
2. The integrated design of printing white + color composite process reduces the printing cost of the darkest fabric and increases the production capacity.
3. The machine has the function of skipping white, which can save more time for users.
4. The built-in software can be used for printing emergency, and the pause function can wait for the problem to be solved before printing, which avoids the user’s property loss.

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

Q: What are the printhead of UV printers?

A: The printhead of UV printers mainly include the following types: Ricoh, Epson, Kyocera, Toshiba, Seiko, Konica, and the most used ones are Epson fifth-generation printhead, Epson 4720 printhead, Epson tenth-generation printhead and Ricoh G5 printhead, Epson It is a non-industrial sprinkler, the others are industrial printhead.

UV flatbed printer UV lamp belongs to one of the core components of the device. Its main function is to ensure that the UV ink adheres to the pattern surface and can be dried quickly and completely to prevent the pattern from discoloring and falling off. During long-term use, whether it is natural aging of parts or improper manual operation, it will cause fault. There are four common faults: the uv lamp is dimmed, the uv lamp is not off, the uv lamp is not on, and the uv lamp has a wrong lighting distance.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

Professional team：Provide one-to-one professional pre-sale, in-sale and after-sale service. If you have any questions, please feel free to contact our customer service. We will serve you wholeheartedly.

TODOjet UV ink is formulated to produce vibrant colors using Cyan, Magenta, Yellow, Black, White, and Varnish.
Combined, this UV inkjet ink enables companies to achieve full-color graphics and images on a wide variety of flat and cylindrical objects.

TODOjet UV ink can be used in practically any UV printers.

Adheres to a wide variety of rigid substrates including glass, plastic, and metal

CMYK + W + V available

Hotsale A3 DTF printer:
* 2 XP600 printheads support fluoresent ink printing
* Fast speed, can each to 5 sqm/h (6 hours can finish one 100m roll film)
* Support vent holes solution,keep the garment breathable function after transfered
* No limit of fabrics

Product attribute introduction: UV ink printing transfer sticker, suitable for hard surface, plane, curved surface and other objects

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.