UV AB dtf film vinyl cold release dtf Pet AB transfer film transfer films UV for UV Dtf Printer

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

It can be used to produce composite laser cardboard, transfer laser cardboard, uv laser decorative materials, and it is the carrier of laser holographic images.

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

With 10 years experiences in printing filed, TODOjet can offer you the DTF printer with high qulity, professional package and good service. All our T-shirt printers need to through the strict quality testing.And TODOjet and offer you one stop solutions service,besides PET film printer, we can also offer you hot melt powder machine, heat press machine and also consumbles like pigment ink, hot melt powder,pet film and other parts that you need.

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

Heating before powdering
The powder is more evenly shaken and the powder is cleaner
Top cover cooling fan, long-term use will not get hot
Avoid the hidden danger of scalding accidents when workers operate the machine

UV inks used in UV printers can be divided into hard ink and soft ink according to the hardness properties of the printing material. Rigid, non-bending, non-deforming materials such as glass, ceramic tile, metal plate, acrylic, wood, etc., use hard ink; elastic, bendable, twisting materials such as leather, soft film, soft PVC, etc., Use soft ink.

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer.

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

Heavy-duty pinch roller: thickened pinch roller and high elastic spring effectively ensure the accuracy and stability of printing paper
Powder Shaking Device: Shaking powder is clean and free of residue
High-performance income and expenditure device: the paper film is better preserved, not easily deformed, and adapts to a variety of materials

The advantage of white ink heat transfer is that it can transfer high-precision pictures and other colorful pattern designs. The actual effect is quite close to the computer hand-painted manuscript. The lack of part: if you touch it hard, you will feel a strong sense of collagen fibers, and the ventilation effect is not good. If you only do simple pattern decoration design for clothing products, bags, and pillows, then you don’t need to consider the ventilation problem.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

TODOjet DTF printer can offer related consumbles like hot melt powder machine, relased PET film and hot melt powder. We have both 30cm*100m and 60cm*100m roll PET film for option, which used for cold peel transfer. You can printing direct to this film with our DTF printer. And this film is the correct micron thickness for powder shaking machine (automated curing machines).

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

Accuracy: Variable Droplet High Quality Printing
Variable Droplets for Beautifully Smooth Gradients: Features a variable droplet feature that prints ink into 3 different sizes of droplets at once

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads 4720/i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

Wi-Fi wireless printing, place it wherever you want, support Epson iPrint to realize a variety of printing applications, and easily share. Support Email Print: You can set an email address for the printer, send Email to the printer, and then print.

TODOjet is a professional manufacture of DTF printer,we can also offer you heat transfer pet film powder dusting, shaking and heating machine. Printed film can be heat transferred on any kind of fabrics.

Environmentally friendly, no waste, small footprint, unlimited fabrics, soft and washable, suitable for personalized heat transfer customization and batch automated production of various fabrics.

Powder machine usually come with DTF printer, for printed film powder coating and curing.Then the film can be transferred on any kind of fabric materials.

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing

Pre-sale: With senior industry experience, analyze customer needs and future development, and customize the overall solution of recommended products and machines