Thermal transfer printing image shaking powder dusting powder shaking powder drying

Heating before powdering
The powder is more evenly shaken and the powder is cleaner
Top cover cooling fan, long-term use will not get hot
Avoid the hidden danger of scalding accidents when workers operate the machine

1. Machine stand
2. Front/rear two-stage heating
3. Plug-in Dalian supply
4. White Ink Stirrer
5. Nozzle area
6. Body

Advantages
1.With timing function, automatic sound &light alarm after completion
2.With lock catch and sealing strip
3.Excellent heat preservation
4.Rapid temperature rise
5.Up to 6 heating tubes
6.Ensure that every corner of the full width can melt
7.It makes the image quality and firmness transferred to the fabric better

المكون الأساسي لآلة الضغط الحراري هو لوحة التسخين ، لذا يجب الانتباه عند اختيار آلة الضغط الحراري.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

We will solve your “trouble”:

Printing method: digital heat transfer,
No plate making, simple process, short timeliness, low cost, low operation difficulty and high cost performance.

1. The curing speed of uv ink is affected by the color
2. Concentration control of black uv ink is very important
3. The viscosity of uv ink varies greatly with temperature
4. The gloss of uv ink is lower than that of oil-based ink
5. Can’t reproduce intermediate colors in uv ink

1.Double Epson XP600 print heads, color and white at the same time.
2.Automatic lifting and lowering ink stack, made of aluminum plate, with better sealing performance,and improving the life of the print head.
3.The two-stage heating of the platform (front/rear) makes the material have better ink absorption.4.The printing speed is improved, and the printing picture is clearer.

As professional DTF printer supplier, we can also offer you related powder shaking machine, full series powder heating and curing machine like 30cm width, 60cm width and also 120cm width can meet your different demand.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

UV printing is a unique method of digital printing utilising ultraviolet (UV) light to dry or cure ink, adhesives or coatings almost as soon as it’s hit the paper, or aluminium, foam board or acrylic – in fact, as long as it fits in the printer, the technique can be used to print on almost anything. UV ink is not poisonous. Although UV ink curing is not poisonous, but not completely harmless. Because UV ink still has certain irritation and corrosive to the skin. But if you choose a green UV ink, you can avoid this situation.

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

Before, if customers want to print on bottle mugs, they need to buy rotary clamp together with uv flatbed printer; Now, no need, UV DTF AB film helps transferring on bottles mugs, even irregular objects, without rotary clamp. Because of this feature, once UV DTF AB film lacunhed, they became hot sale.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

A3 new digital offset printer, we develop and produce independently, do not use Epson L1800 and 1390 modification, our machine structure is reasonable and completely similar to industrial machine structure, using PP color management software color does not cast color.

Powder machine usually come with DTF printer, for printed film powder coating and curing.Then the film can be transferred on any kind of fabric materials.

As Christmas approaches, most users’ UV flatbed printers will face a non-use state for more than 7 days. Coupled with the influence of the cold weather in winter, the maintenance of the equipment will be more thorough and comprehensive than usual. This article mainly discusses how to maintain the nozzle, core components, and external environment.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

UV DTF AB Film for digital uv dtf printer is hot, there are different types in the market. Some film A needs to print on transparent film, then laminating film B with heating; some film A needs to white paper film, then laminating film B with heating. Our this new upgraded AB film is printing on whtie paper side, then laminating film B with only pressure, no need heating.

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

The advantage of white ink heat transfer is that it can transfer high-precision pictures and other colorful pattern designs. The actual effect is quite close to the computer hand-painted manuscript. The lack of part: if you touch it hard, you will feel a strong sense of collagen fibers, and the ventilation effect is not good. If you only do simple pattern decoration design for clothing products, bags, and pillows, then you don’t need to consider the ventilation problem.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

Good chemical stability, can be stored at room temperature for a long time without deterioration.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.