H650 Pro DTF Powder Shaker Machine 600mm 3-Stage Heating Auto Powder Recycling Built-in Air Purifier

Our DTF ink (aka Direct to Film ink) has been carefully selected and tested, and our DTF ink manufacturing partners carefully scrutinized to ensure the quality standards in ink production and consistency.for Black, Cyan, Magenta, Yellow and White; The DTF ink / transfers can be transferred to a variety of textiles and fabrics (cotton, polyester and more) as well as other substrates. Although all our DTF inks will work on a variety of engines, we also offer the desktopDTF and wideDTF ink series that are formulated for a more specific set of printheads / printer engines.

Things to note:

1. The finished UV film must be trial-printed before mass production. After the trial printing is qualified, mass production can be carried out.

2. Unused UV film products should be bagged and sealed. Make sure the products are dry and do not store them exposed to moisture and high temperatures.

3. This product information is true and accurate. AGP declares that it does not assume any liability for incidental or consequential losses;

High quality
The product has high-quality features such as high elasticity, anti-stretching, anti-sublimation, anti-slip, non-fading, non-cracking, non-falling, washable, wear-resistant and high-temperature resistant, easy to iron, easy to carve and tear, etc.
More efficient
AGP transfer film requires no secondary treatment on the surface and can be printed directly.

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Ideal for DTF Production Lines

The H650 Pro can be paired with:

Epson I3200 DTF printers
Epson XP600 DTF printers
Epson 4720 DTF printers
Dual-head DTF printers
Multi-head industrial DTF printers

Did you choose the right one? Guide to DTF Transfer Hot Melt Powders

Hot melt powder is the key material in the DTF transfer process. You may be wondering what role it plays in the process. Let’s find out!

Hot melt powder is a white powdery adhesive. It comes in three different grades: coarse powder (80 mesh), medium powder (160 mesh), and fine powder (200 mesh, 250 mesh). Coarse powder is mainly used for flocking transfer, and fine powder is mainly used for DTF transfer. Because it has such great adhesive properties, hot melt powder is often used as a high-quality hot melt adhesive in other industries. It’s very elastic at room temperature, turns into a viscous and fluid state when heated and melted, and solidifies quickly.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

1. Machine stand
2. Front/rear two-stage heating
3. Plug-in Dalian supply
4. White Ink Stirrer
5. Nozzle area
6. Body

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

Original i3200 pinthead i3200 A1 E1 U1 head for Eco Solvent Sublimation Water-Based UV inkjet printer
1. Product Name: i3200 head
2. To be used for : Printer with sublimation ink,. textile printer
3. Weight: 0.3kg
4. Print nozzle qty: 3200 pcs

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

Compatible with popular RIP software and designed for compact efficiency, the DTF-T652/653/654 represents the pinnacle of printing technology for businesses seeking enhanced capabilities. Upgrade your printing infrastructure today and embrace the future of printing excellence.

The D800 Automatic Powder Return Shaker Machine is designed for DTF printing workflows, integrating powder shaking, curing, and automatic powder recycling in one compact system. With an 800mm working width and 3 heating zones, it ensures even powder distribution, stable curing, and reduced material waste.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

The AGP H650 Pro is a commercial-grade DTF powder shaker engineered for distributors and print shop operators who demand consistency, efficiency, and low-maintenance performance from their production line. With a 600mm feeding width, PLC-based automation, three-zone heating, and a fully integrated powder recycling system, the H650 Pro is built to handle the realities of high-volume DTF transfer production — shift after shift, without compromise.

TYPE: UV INK
SUITABLE FOR: Printer with Epson DX7 DX5 XP600 TX800 head
COLOR: CMYK+LC+LM+White+Varnish
TESTING: 100% testing on the machine before shipment
HARD UV INK:
mainly printing on hard type materials, like Wood, Glass, Acrylic, Metal, Crystal, etc.
SOFT UV INK:
mainly printing on soft type materials, like leather, vinyl, TPU, EVA, wall paper, lamp box, etc.

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

How to use UV transfer sticker
1. Remove the transfer sticker and tear it off
2. Align the position and paste it
3. Remove the transparent film after pressing the pattern
4. Paste completed

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Mit 10 Jahren Erfahrung im Druckbereich kann AGP Ihnen hochwertige DTF-Drucker mit professionellem Paket und gutem Service anbieten. Alle unsere T-Shirt-Drucker müssen strenge Qualitätsprüfungen bestehen. Darüber hinaus bietet AGP Ihnen einen umfassenden Lösungsservice, der Folgendes umfasst:

Schmelzpulvermaschinen
Heißpressmaschinen
Verbrauchsmaterialien wie Pigmenttinte, heiß schmelzendes Pulver, PET-Folie und andere benötigte Teile

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

UV printing is environmental friendly while producing the crisp image on the printed paper boxes and gift paper boxes. Below are the benefits of the UV printing and inks.Faster turnaround time: UV inks dry instantly on the press when exposed to the UV light.Zero VOC release: unlike the conventional inks containing the chemical solvents, the UV inks release no volatile organic compounds, which is abbreviated to VOC. Extra protection of the printing because of the better resistance to smudge and abrasion.Crisp look to the printed text and graphics on the paper box and bag.

DTF Printers are an alternative process to DTG printers for T-shirt printing or other garment printing,this direct to film printer use water-based pigment ink to print a film transfer. Once the ink is dry, powdered glue is applied to the back. Now it is heat cured ready for storage or instant use(here need a powder curing machine). It makes no difference on cotton, silk, polyester, synthetic fabrics, genuine leather, or synthetic leather – the DTF printing process can be applied to all of them.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.