DTF Adhesive Powder Factory Price White Hot Melt Powder for Heat Transfer Printing

We all know that the custom production of T-shirts is usually the heat transfer process. Heat transfer is to print the pattern on the heat transfer paper first, and then cover the printed product on the T-shirt after printing, and put it into the heat transfer machine ( Heat press machine) heat and pressurize for a few seconds, and the pattern is transferred to the T-shirt.

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

Garment printers can print on various rolls or sheets of materials, such as: thermal transfer film, film, self-adhesive, PU film, etc. At present, the most popular application is in the clothing industry.

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

UV printing is environmental friendly while producing the crisp image on the printed paper boxes and gift paper boxes. Below are the benefits of the UV printing and inks.Faster turnaround time: UV inks dry instantly on the press when exposed to the UV light.Zero VOC release: unlike the conventional inks containing the chemical solvents, the UV inks release no volatile organic compounds, which is abbreviated to VOC. Extra protection of the printing because of the better resistance to smudge and abrasion.Crisp look to the printed text and graphics on the paper box and bag.

How to use UV transfer sticker
1. Remove the transfer sticker and tear it off
2. Align the position and paste it
3. Remove the transparent film after pressing the pattern
4. Paste completed

Type:Water Based Ink
Printing Type:Digital printing
Place of Origin:Henan
Brand Name:TODOjet
Model Number:CMYKLcLmW
Key name:Textile Pigment ink 6 Color DTF Printer Ink For Inkjet Printer

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

Wi-Fi wireless printing, place it wherever you want, support Epson iPrint to realize a variety of printing applications, and easily share. Support Email Print: You can set an email address for the printer, send Email to the printer, and then print.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads 4720/i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

DTF Features:
1. Free edition, fast printing speed, low cost, instant, low power consumption, breaking the limitations of traditional color printing production, can print any type.
2. The integrated design of printing white + color composite process reduces the printing cost of the darkest fabric and increases the production capacity.
3. The machine has the function of skipping white, which can save more time for users.
4. The built-in software can be used for printing emergency, and the pause function can wait for the problem to be solved before printing, which avoids the user’s property loss.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

Hotsale A3 DTF printer:
* 2 XP600 printheads support fluoresent ink printing
* Fast speed, can each to 5 sqm/h (6 hours can finish one 100m roll film)
* Support vent holes solution,keep the garment breathable function after transfered
* No limit of fabrics

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

It can be used to produce composite laser cardboard, transfer laser cardboard, uv laser decorative materials, and it is the carrier of laser holographic images.

The original 6-color ink has more stable color performance, wider color gamut, more colorful picture layers, and greatly improved preservation in terms of light resistance, oxidation resistance and corrosion resistance. Combined with Epson’s micro piezoelectric printing technology, users can enjoy true high-quality print output.

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

Its characteristics are: as long as the mild bonding conditions can obtain excellent washing fastness (up to 60 degrees water temperature washing) and dry cleaning fastness

TODOjet UV ink is formulated to produce vibrant colors using Cyan, Magenta, Yellow, Black, White, and Varnish.
Combined, this UV inkjet ink enables companies to achieve full-color graphics and images on a wide variety of flat and cylindrical objects.

TODOjet UV ink can be used in practically any UV printers.

Adheres to a wide variety of rigid substrates including glass, plastic, and metal

CMYK + W + V available

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.