60cm 65cm DTF Mini Powder shaker digital t-shirt dtf printing machine auto powder-recycling device

At present, the most widely used laser films on the market mainly include laser aluminized films and laser bronzing films.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

This neutral ink was created to enable printing on items such as coolers and plastic bottles without cracking or distorting the image. This type is available for all of TODOJet ’ UV printers, including Cyan, Magenta, Yellow, Black, White, and Varnish.
Full CMYKWW+V color range
High durability

No need to engrave waste and lamination, improve production efficiency, unlimited patterns, natural hollowing, lighter and breathable, short cycle and fast delivery, breaking through the limitations of traditional process color registration plate making, no plate making, 1 piece minimum order cost-effective, no high cost The investment in equipment and venues greatly reduces the investment cost.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

Original i3200 pinthead i3200 A1 E1 U1 head for Eco Solvent Sublimation Water-Based UV inkjet printer
1. Product Name: i3200 head
2. To be used for : Printer with sublimation ink,. textile printer
3. Weight: 0.3kg
4. Print nozzle qty: 3200 pcs

1.Up and down cap station,Better seal performance for the printhead
2.Temperature control,Front and back, 2 stage heating
3.Hiwin guide rail,Printing more stable and quiet
4.Good working performance,Fluorescent orange and green are support

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

Accuracy: Variable Droplet High Quality Printing
Variable Droplets for Beautifully Smooth Gradients: Features a variable droplet feature that prints ink into 3 different sizes of droplets at once

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

Why choose us
1. Good materials are more resistant to corrosion
2. High viscosity, more firm and not easy to fall off
3. Good waterproof performance
4. High wear resistance, good quality, not easy to scratch

Did you choose the right one? Guide to DTF Transfer Hot Melt Powders

Hot melt powder is the key material in the DTF transfer process. You may be wondering what role it plays in the process. Let’s find out!

Hot melt powder is a white powdery adhesive. It comes in three different grades: coarse powder (80 mesh), medium powder (160 mesh), and fine powder (200 mesh, 250 mesh). Coarse powder is mainly used for flocking transfer, and fine powder is mainly used for DTF transfer. Because it has such great adhesive properties, hot melt powder is often used as a high-quality hot melt adhesive in other industries. It’s very elastic at room temperature, turns into a viscous and fluid state when heated and melted, and solidifies quickly.

Heat transfer printing: For the embodiment of details, it is required that the white color of the printer be accurately aligned. Under normal printing speed of 6pas bidirectional printing, the printing accuracy should be high. We can print and heat transfer down to 0.3 mm at a speed of 24 meters per hour. of thin lines.

The most widely used laser films on the market mainly include laser iridescent film, laser dielectric film, transparent laser film, laser dielectric film, etc.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

The way of using this machine is so easy, we could adopt the following steps to operate the DTF printer: Printing；Dusting, shaking and drying powder；Heat transfer. Meanwhile, we need to focus on some details.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

Factory delivery: provide technical guidance ink/powder/heat transfer film offset heat transfer printer one-stop supply,Use the special paint ink for transfer film to print the pattern on the PET film, directly remove dust, no need to cut, no need to discharge waste, and the fast transfer of natural hollowing is suitable for any fabric.

High quality
The product has high-quality features such as high elasticity, anti-stretching, anti-sublimation, anti-slip, non-fading, non-cracking, non-falling, washable, wear-resistant and high-temperature resistant, easy to iron, easy to carve and tear, etc.
More efficient
AGP transfer film requires no secondary treatment on the surface and can be printed directly.

Flocking Printing
Flocking printing is an innovative technique that involves applying short fibers of various materials such as rayon, cotton or wool to a surface coated with an adhesive. This process not only adds a luxurious velvet or suede-like texture to the material, but also allows for vibrant and customized colors to be achieved through dyeing. By incorporating flocking printing into your designs, you can effortlessly enhance the visual appeal and tactile experience of your printed projects.

The production process of the digital offset heat transfer and powder-shaking machine is greatly simplified, and the effect of powder-shaking is excellent.

When the UV flatbed printer nozzle is used for a long time, it is easy to ink on the surface area. If left alone, after a long time, the nozzle will easily become clogged. There are generally five causes of this phenomenon. Depending on the design of the UV flatbed printer from different manufacturers, there may be 7 or 4 phenomenon, but mastering these five can basically solve more than 90% of the ink accumulation problem.

Applications of This Desktop UV Flatbed Printer:

Direct Printing on Various Substrates: Print directly on metal, wood, acrylic, plastic, and more, suitable for diverse industries.

AB Film Printing Solution: Ideal for irregular objects like bottles and other unique-shaped items. Explore opportunities in the label printing industry, with crystal sticker labels gaining popularity.

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

DTF Printers are an alternative process to DTG printers for T-shirt printing or other garment printing,this direct to film printer use water-based pigment ink to print a film transfer. Once the ink is dry, powdered glue is applied to the back. Now it is heat cured ready for storage or instant use(here need a powder curing machine). It makes no difference on cotton, silk, polyester, synthetic fabrics, genuine leather, or synthetic leather – the DTF printing process can be applied to all of them.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!