White Ink Direct To Film Printer inkjet Printing Machine XP600 A3 DTF Printer With Shaker and Dryer

Product name:TODOjet A3 DTF Pro Printer
Print color:CMYK+Fluorescent Orange + Fluorescent Green + White
RIP software:Maintop/ Photoprint
Language:Multi Language Include Enlish
Print speed:4.5-5 sqm/h
Print head:XP600
Application:Cloth

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

Want one set machines to print on different items such as garment of different material, hoodies, shoes, bags,etc?
Can check this DTF solution.
Compared with the DTG direct to garment printer, this DTF solution is flexible in positioning, and avoid the waste of t-shirt due to any unexpected fault,no need pre-treating, and good for mass production.

DTF is a big helper to garment decoration that you cannot ignore.Nowadays, pattern can be seen everywhere, such as T-shirt,glass, phone case,pillow,socks,mask.The patterns on the pet film that DTF printer prints make our life more interesting.One of the benefits to DTF Printers is there is no need to use pre-treatment.New generation DTF PET Film Printing Machine with hot melt powder Shaking machine with new technology for garment printing. When the film is dried out, it can be used to transfer print onto the garment. Which can to be press on both dark and light Garments like cotton, polyester, spandex, leather, nylon and more.

New generation A3 DTF PET film Printing machine with hot melt powder Shaking machine with new technology for garment printing.The printed & dried be used to transfer print onto any kind of fabrics. Which can to be press on both dark and light garments like cotton, polyester, silk, cotton, spandex, linen,leather, nylon and more.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

One stop solution of TODOJet DTF printer. TODOjet is a professional supplier, besides UV printer and DTF printer,we can also offer you one stop solution with related consumables, such as UV ink, pigment ink, pet film, powder machine,etc.

DTF Printer-A3
CMYK+ Fluorescent Color+ White
Printhead: 2PCS EPSON F1080
Printing width: 30cm
Printing Speed: 4.5sqm/h (about 15m/h)
Software: Maintop/Photoprint
Ink type: Pigment Ink

Yüksək sürətli çapda nöqtənin dəqiqliyinə sahib olmaq üçün biz özümüz tərəfindən hazırlanmış patent çap alqoritmini inkişaf etdirdik ki, nöqtə kompensasiyası vasitəsilə qrafikin çap dəqiqliyini təmin edir.

Heating before powdering
The powder is more evenly shaken and the powder is cleaner
Top cover cooling fan, long-term use will not get hot
Avoid the hidden danger of scalding accidents when workers operate the machine

1) Simple structure in linear type, easy in installation and maintation.
2) Adopting advanced high quality components in pneumatic parts, electric parts and operation parts.
3) Running in a high automatization and intellectualization, no pollution.
4) 3D printing effect, real, realistic, delicate.

● Automatic A3 printing, glueing and curing line for printing on light, color and dark T-shirts.
● Printing is carried out on a special film with white ink in a mirror image, after which the finished film is transferred to a T-shirt in a heat press
● Manual application of glue is possible, however, for printing large runs it is preferable to use a roll-to-roll printing line
● The resulting image is highly resistant to washing, up to 25 washes
● The image is bright and saturated, pleasant to the touch
● Professional software ensures correct color reproduction
● Durable printer design allows up to 12 A3 T-shirts per hour

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

TODOjet DTF Printer hot sale A3 60cm 8colors pigment ink automatic dtf printer inkjet printer t-shirt printing machine. DTF printer no limits on colors and no Fabric limit ,it could print small and big quantity of prints, especially very good for customized designs on shirts ,small logo heat spress , the low cost and easy operate make the Product goes crazy selling around the world .Support fluoresent ink printing like Fr,Fm,Fy,Fg.

White ink heat transfer printer nozzle maintenance matters, customers and friends who buy white ink heat transfer printers know that in the white ink heat transfer printer equipment, the nozzle is the core component of the entire printer, and the quality of the nozzle will directly affect the quality of the print output. At the same time, the nozzle is also the most expensive part on the whole machine. Once the nozzle is damaged, it will bring great economic losses to customers and friends.

A3 DTF can achieve high printing speed under small printing width. The first nozzle is used for white ink and the second is used for CMYK ink. The printer is equipped with a white ink circulation stirring system, stable printing and long life of the print head. The mechanical parts and ink system used in DTF borrow large-format printers, so the equipment is reliable and has a long service life.
Print head number:1/2 pcs XP600
Media Type:PET Film (Premium Quality)
RIP software:Maintop/Photoprint
Printing Speed:3-10 sqm/h
Printing Color:CMYK+W
Max Printing Width :A3 size/ 310mm

The advantages and disadvantages of the white ink heat transfer printing scheme are relatively easy to understand. The process of white ink heat transfer is to use a digital heat transfer printer to mirror and print the special white ink on the special PET printing film, then print the CMYK color ink, and then sprinkle it through a special shaker. Toner, powder shaking and drying, the entire printing process is completed by the white ink heat transfer printing machine, which allows the original complex process to be completed automatically by the machine, saving a lot of labor costs and shortening the speed of the finished product. White ink heat transfer products It is also very beautiful, and the pattern of the hot stamping can be compared with the photo. The key point is that the application on the fabric is all cotton and polyester, pure cotton, pure polyester, cotton-polyester composite, cotton linen, denim, non-woven fabrics, etc. can be hot stamped, no fabric, no color, any pattern can be hot stamped print out.

TODOjet TD-6504E is Four heads DTF printer–direct to film printer with powder machine. Four Epson printhead support double CMYK+W, which can improve your production efficiency.

Heat press machine operation process: adjust the thermostat to the required temperature, after the temperature reaches the set temperature, the indicator on the upper part of the thermostat goes out, and you can start working at this time.

Application
Multi-Application: Low cost and multi-function can transfer on lots of materials such as Cotton, polyester, linen, polyurethane fiber, acrylic fibers, denim fabric, nylon, Black, and light material.

DTF Printing is also referred to as Direct To Film Printing, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates).TODOjet A3 DTF Printer usually together with powder shaking machine.If you purchase full set TODOjet DTF printer,you can print on any kind of fabric, no matter dark or light. There can be more varieties in your product line. Save labor costs, and one employee can operate the machine.No need pretreatment like DTG printer,also no need making plate like screen printer. Our A3 DTF with two printhead support faster production like 1000+ T-shirts LOGO printing in a day.

❈ No pre-treatment: In DTF Printer, there is no need to pre-treat the fabric because it is pre-printed on the film and must be transferred. 
❈ Printing on film: In DTF, we print on film and then the design must be transferred to the fabric. This can make the process a little longer compared to DTG. 
❈Adhesive powder: This type of printing requires the use of Adhesive powder, which is applied immediately after the ink is printed on the film. On printers created for DTF, this step is included in the printer itself, so you can avoid any manual steps. 
❈ Using white ink: In this case, a layer of white ink is required, placed on top of the color layer. This is the one that is transferred to the fabric and used as the basis for the main color of the design. 
❈ Any type of fabric: One of the advantages of DTF is that it allows you to use any type of fabric, not just cotton. 
❈ Transfer from film to fabric: The final step of the process is to remove the printed film and transfer it to the fabric using a press. 

High precision, high efficiency, more delicate colors, DIY personalized customization, wide application, easy operation, easy maintenance, white ink circulation system, smoother ink output, and extended print head life.

Printer not printing colors correctly is a common problem printer owners experience from time to time. Printers can be pretty confusing machines. what if the printer that you just bought suddenly decided to stop printing colors right. How are you going to print now? Today, we’re going to help you fix your printer not printing in real color and tell you how you can prevent this printer issue from reoccurring.

1.print head：2*EPSON XP600 2.color：CMYK+W+LcLm/FrFg/FyFm 3.speed：normal 4.5sqm/h HD 3.5sqm/h 4.ink supply： auto ink supply，white ink circulating and stirring system 5.media transfer：auto feed-in and take-up system，lack of paper 6.ink tank：lack of ink alarm equiped in every tank

We can put a coin stand on the platform to test the stability of DTF printer, and meanwhile, we can test the printing quality. As a professional DTF printer manufacturer,TODOjet can offer you high quality printer and better service.

DTF printer looks great —— bright colors, good grade. But the products going straight to the clothing are the best quality prints. The A3 DTF Printer supports CMYK+ Fluorescent Color+ White, with 2PCS EPSON F1080 Printhead. DTF does everything you need. It will allow you to print on 100% cotton and black garments, it will have great feel and washability.

CMYK+ Fluorescent Color + White
No limit of fabric materials
No need pre-coating
No need plate making

The production process of the digital offset heat transfer and powder-shaking machine is greatly simplified, and the effect of powder-shaking is excellent.

1. Before printing, clean the dirt and dust on the printing platform area and the surface of the printing medium to prevent the electrostatic characteristics of the printing process from attracting dust on the surface of the nozzle, causing the nozzle hole to be blocked.
2. After starting up and before shutting down, print the nozzle test strip to check the status of the nozzle. If there is a blockage or oblique spray, it should be cleaned in time.