30cm roll dtf printer

After-sales service is guaranteed nationwide, the official customer service phone is online 24 hours, and the technology has always been in the tie, and has never been surpassed!

1.Spirit level
Intuitive machine balance
2. Peristaltic pump device
Extend the life of expensive printheads

White ink heat transfer printer is a kind of mechatronics precision equipment, the structure is generally more complex, compared with other external equipment of the computer, the failure rate is also relatively high, heat transfer printer printing disconnection is a common fault, generally caused by the following reasons .

TODOjet the new offset heat transfer solution of digital offset heat transfer printer is as clean as coarse powder and fine powder, free of engraving and waste, soft pattern, breathable and skin-friendly, and the printable materials include cotton fabrics, high-elastic fabrics, Nylon fabric, chemical fiber fabric, swimwear, denim, PVC, EVA, etc.

Good ink absorption, high color reproduction, more vivid colors, bright (enhanced) coating evenly, no foaming, back coating on the back, no slippage, no slippage.

Digital offset heat transfer is actually to use an offset heat transfer printer to print the pattern on a special printing film, and then sprinkle hot melt glue powder on the back of the pattern of the printing film by a powder shaker, and then put it on the fabric for ironing. . Digital offset heat transfer can also clearly print process lines and small letters, and has the advantages of no engraving, no hollowing, and no waste discharge.

Light-colored fabric printing effect:
digital printing
bright colors
Simple and fast
No waste
Hollow and breathable
—————————————————-
Dark fabric printing effect:
digital printing
Screen Overprinting
No need to cut
No waste
soft and delicate
Washable and scrub-resistant

A3 DTF Pro Printer and transfer machine is a special equipment for hot stamping various transfer printing papers and thermal transfer printing. It can control temperature, time, pressure, durability, easy operation, small size, flexibility and low cost.

Automatic powder shaker

Features introduction

1.Quick Control Panel
Ultra-simple operation panel
Adapt to the public, free training

No manual requirements, accurate positioning of white ink and color ink, environmental protection and no waste discharge
1. No need to stroke, no need to hollow out, no need to open the board, one piece of printing
2. Small footprint, one-person operation, short cycle, fast delivery, high temperature resistance and washing resistance
3, suitable for any fabric, dark and light-colored cloth together

Digital printing (soft skin feel) ink-absorbing PET film, suitable for digital transfer printing. The pattern after ironing has the same texture as PU glue, and the hand feel is softer than the glue (30~50% softer than the pattern printed on the oil-based coating film).

DTF printer white ink heat transfer printer, film printing film or printing film, ink printing ink can also be called printing ink! DTF is suitable for many different garment materials: such as cotton, polyester, nylon, treated leather, polyester fabrics, 50/50 blends, and light and dark fabrics.

Printing color and white paint ink on the digital heat transfer film, combined with powdering, transfer printing and other supporting processes, realizes the production and processing of textile digital heat transfer clothing. ①Digital printing (color first, then white) →②Pre-drying→③Sprinkle powder and shake powder→④Fully drying (Temperature: 140-150°C, Time: 3-5 minutes)→⑤Press (Temperature: 150- 180°C, time: 7-20 seconds)

1. High-speed printing 12m²/hour in high-speed mode and 10m²/hour in high-speed mode, the printing effect of high-speed mode exceeds that of high-definition machines on the market.
2. The heat press machine has constant tension feeding and damping feeding, which overcomes the influence of tension and supports large rolls to reject arched paper.
3.Color ink and white ink double-circulation ink supply, PLC control ink supply system, independent adjustment of pressure and flow rate, to overcome the influence of ink failure and temperature.

When choosing a white ink heat press machine manufacturer, you should start with the following three aspects:

1, the amount of funds, in line with their own budget premise;

2. The speed and accuracy requirements of the material, whether the heat transfer white ink printer can meet the requirements of output and printing quality per unit time;

3. After-sales service of the equipment, whether there is after-sales service guarantee;

When choosing, compare among multiple manufacturers, and compare the printing speed, printing accuracy, stability, etc.

Nowadays, it is not only T-shirts, but thermal transfer offset heat transfer is generally used to customize polo shirts, short-sleeved T-shirts, clothing shoes and hats, backpacks, luggage leather goods, trademark logos, etc. It has strong cultural and artistic expression and Ornamental, unique culture, soft touch, clean-resistant, clear and delicate patterns, which are incomparable with other thermal transfer technology products.

When we want to know the DTF printer, the following information is important. Firstly, it has Automatic roll-to-roll DTF line, and it could print on any A3 size T-shirts. Secondly, We have auto feeding and take-up system. Meanwhile, there is front and rear heating, auto ink supply, white ink circulating and stirring. As for the Print material, it can be the Swimsuit, Diving suit and so on. Regarding the Printable Media, that could transfer to cotton, nylon, hat, etc.

A point to note:The hand transferred to the clothes will be slightly larger than some films, but it is basically negligible.

After ironing, do not squeeze the clothing into a small space. You can hang it on a hanger or spread it flat to keep the clothing flat.

Fast printing speed Direct to Film Printer A3 DTG heat transfer inkjet printer with 5 color ink white ink,The image quality is comparable to Class A heat transfer. Clothing digital printing is actually the digital direct injection in the industry, and the pattern effect of direct injection is also good. Now there are small digital direct injection machines, which are relatively simple to operate. They are suitable for making clothing DIY, team clothes and the like.