60cm 600mm A1 Impresora with 2 I3200 head direct to film printer t-shirt diy for DIY business

As professional DTF printer supplier, we can also offer you related powder shaking machine, full series powder heating and curing machine like 30cm width, 60cm width and also 120cm width can meet your different demand.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

The transfer paper can output the pattern to be hot stamped with an inkjet printer, and then print it on the clothes.

TODOjet 60cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and better after-sale service. We also offer wholesale price and OEM service.

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

UV printing is one of the most flexible and exciting print processes ever created, and its uses are almost limitless. For regular object, UV Printing is so convenient. But for irregular object, there are some problems, the AB film solution  is  suitable  for these irregular object and you can also develop a new market of label printing industry. Its just expand the application of UV flatbed printer.

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

The production of heat transfer clothing is a hot project that has only emerged in recent years, which is heat transfer technology. Thermal transfer heat transfer technology has a wide range of market applications, widely used in clothing, T-shirts, luggage, handbags, shoes and hats, socks, gloves, aprons, handicrafts and other fields. Production of heat transfer, high elasticity, good washing fastness, brilliant color.

Product attribute introduction: UV ink printing transfer sticker, suitable for hard surface, plane, curved surface and other objects

Platform upgrade: precision CNC aluminum alloy mute guide rail, lengthened stainless steel heating printing platform, printing film is more stable and does not arch film
Simple operation panel: simple operation, Chinese and English system keys, one-key cleaning of the nozzle and ink loading is more convenient, effectively improving work efficiency

المكون الأساسي لآلة الضغط الحراري هو لوحة التسخين ، لذا يجب الانتباه عند اختيار آلة الضغط الحراري.

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

Working mechanism: The heating plate is used to generate heat, and with a certain pressure, specific temperature and time, the layer and thermosetting on the transfer paper are attached to the substrate or penetrated into the substrate.

TODOjet is a professional DTF printer supplier,we can also offer you one stop solution with related consumables, such as pigment ink, pet film, powder machine,and hot melt powder etc.If you have good quantity,we can offer you wholesale price.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

When many friends buy a UV printer, the general manufacturer will promise the machine warranty for 1 year or 2 years or 3 years, etc., but there is a saying: Ink circuit system and print heads are not covered by the warranty.

Applicable shapes: round, square, rectangle, oval, special-shaped, irregular shape
Scope of application: hardware, tools, clothing, daily chemicals, tea, etc.

1. Machine stand
2. Front/rear two-stage heating
3. Plug-in Dalian supply
4. White Ink Stirrer
5. Nozzle area
6. Body

We all know that the custom production of T-shirts is usually the heat transfer process. Heat transfer is to print the pattern on the heat transfer paper first, and then cover the printed product on the T-shirt after printing, and put it into the heat transfer machine ( Heat press machine) heat and pressurize for a few seconds, and the pattern is transferred to the T-shirt.

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

1. Source manufacturer, free proofing, lifetime maintenance
2. Personalized customization, unlimited fabrics, suitable for pasting in various shapes
3. Simple operation, Liyin Lidry, one-time molding

The way of using this machine is so easy, we could adopt the following steps to operate the DTF printer: Printing；Dusting, shaking and drying powder；Heat transfer. Meanwhile, we need to focus on some details.

Pure black when printing is generally used for smaller characters. If the full-color black (C100 M100 Y100 K100) is used, the ink concentration is too high, the ink is not easy to dry and easy to print. Therefore, it is recommended to use monochrome black (C0 M0 Y0 K100).

Easy to use, tear and paste, UV printing, good color reproduction, meet the needs of the project, environmental protection, waterproof and wear-resistant, high-temperature resistance,colorful, Golden glossy surface and good 3D texture, simple operation, easy to paste, can paste any material (except fabric).

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink