dtf printer 50cm 60cm dtf double xp600 i3200 print head with powder shaker machine for any fabric

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

Each digital inkjet printer comes in a similar way: a print head.All component print heads for small or large formate inkjet printers, printing ink on all different types of media.The inkjet print heads spray the ink onto paper or other media in a controlled way to provide the desired image. Our TODOjet printesr usually use the Epson F1080 and Epson i3200 printhead.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

UV Curable Varnish UV Primer Liquid For UV Flatbed Printer machine varnish coating for phone case acrylic glass wood

A Comprehensive Guide to Identifying and Selecting Quality PET Film
In the dynamic world of Direct-to-Film (DTF) printing, the quality of your PET film serves as a linchpin in the pursuit of exceptional results. To empower your printing journey, it’s vital to delve into the nuances of identifying and selecting top-notch PET film. Here’s an extensive guide brimming with valuable insights to navigate this critical aspect of DTF printing:
Tip 1: Vibrant Color Saturation Achieving stunning colors starts with top-notch ink and a professional ICC profile. Opt for a DTF film boasting a superior ink-absorb coating layer for optimal compatibility between ink and film.
Tip 2: Precision in Printing Address issues like holes, especially in black-colored prints. Choose a high-quality DTF film to enhance the precision of your prints and mitigate potential problems.

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

Good chemical stability, can be stored at room temperature for a long time without deterioration.

Working mechanism: The heating plate is used to generate heat, and with a certain pressure, specific temperature and time, the layer and thermosetting on the transfer paper are attached to the substrate or penetrated into the substrate.

No need to engrave waste and lamination, improve production efficiency, unlimited patterns, natural hollowing, lighter and breathable, short cycle and fast delivery, breaking through the limitations of traditional process color registration plate making, no plate making, 1 piece minimum order cost-effective, no high cost The investment in equipment and venues greatly reduces the investment cost.

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

DTF PET film with different size for your reference, 30cm*100m/roll and 60cm*100m/roll. This anti-static PET film for cold peel, it can feed continously during printing.Meanwhile, we can also offer other DTF printer consumbles like hot melt powder and pigment ink.

You need more than a DTF printer, you need an experienced supplier with satisfactory after-sales service in the field to build your brand and grow your profits. Let Todojet help you achieve business success.Latest technology of A3 DTF Printer ,Todojet DTF Printer is equipped with PET film

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

Although UV printer can print patterns on the surface of hundreds of materials or thousands of materials, due to the differences in the characteristics of the surface of different materials, the adhesion of UV ink, and flexibility, some materials will peel off and peel off Situation, this requires UV coating primer to solve this problem.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

Print what you want to print, with full color to give you a more real experience, high-speed printing without manual after-sales worry-free, high-speed printing, mass production.

As professional UV printer and DTF printer manufacturer, we not only offer the printers, but also provide the related consumables and spare parts like original and new F1080 xp600 print head DX6 DX10 DX11 4720 i3200 printhead for UV printer and DTF printer machine.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

1. More choices on dark colored fabric
2. Reducing your production cost
3. Better print out on performance
4. Environmental friendly

Shaking powder fixing machine
Accurate alignment of printed patterns
Hot melt adhesive powder is sprayed evenly
Shake powder quickly and efficiently
Automatic drying and color fixing