Small A3 Dtf Printer 30cm Transfer Printer with Auto Shake Powder Machine Dtf Printer for Dtf Transfer Printing

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

1, Wear masks, do not need to be particularly expensive, generally a unit price of about 3RMB;
2. Wear disposable gloves to avoid direct contact between UV ink and the skin on your hands, some people will be allergic;

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

Pre-sale: With senior industry experience, analyze customer needs and future development, and customize the overall solution of recommended products and machines

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

Its characteristics are: as long as the mild bonding conditions can obtain excellent washing fastness (up to 60 degrees water temperature washing) and dry cleaning fastness

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

UV DTF AB Film for digital uv dtf printer is hot, there are different types in the market. Some film A needs to print on transparent film, then laminating film B with heating; some film A needs to white paper film, then laminating film B with heating. Our this new upgraded AB film is printing on whtie paper side, then laminating film B with only pressure, no need heating.

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

TYPE: UV INK
SUITABLE FOR: Printer with Epson DX7 DX5 XP600 TX800 head
COLOR: CMYK+LC+LM+White+Varnish
TESTING: 100% testing on the machine before shipment
HARD UV INK:
mainly printing on hard type materials, like Wood, Glass, Acrylic, Metal, Crystal, etc.
SOFT UV INK:
mainly printing on soft type materials, like leather, vinyl, TPU, EVA, wall paper, lamp box, etc.

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

Our DTF ink (aka Direct to Film ink) has been carefully selected and tested, and our DTF ink manufacturing partners carefully scrutinized to ensure the quality standards in ink production and consistency.for Black, Cyan, Magenta, Yellow and White; The DTF ink / transfers can be transferred to a variety of textiles and fabrics (cotton, polyester and more) as well as other substrates. Although all our DTF inks will work on a variety of engines, we also offer the desktopDTF and wideDTF ink series that are formulated for a more specific set of printheads / printer engines.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

1.Up and down cap station,Better seal performance for the printhead
2.Temperature control,Front and back, 2 stage heating
3.Hiwin guide rail,Printing more stable and quiet
4.Good working performance,Fluorescent orange and green are support

A3 DTF Printer, Our Latest A3DTF Printer is Officially Released. Direct to Film printing, or DTF, is a new technology that allows users to print designs onto special films. And then do heat transfer in any fabric，A very good way to do for every craft and DIY.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

UV AB Film material is waterproof and high temperature resistant, wear-resistant and scratch-resistant for daily use, bright color and clear details
UV Ink is low-odor, non-toxic, safe and secure, smooth printing without blocking the nozzle, rich

UV printing is one of the most flexible and exciting print processes ever created, and its uses are almost limitless. For regular object, UV Printing is so convenient. But for irregular object, there are some problems, the AB film solution  is  suitable  for these irregular object and you can also develop a new market of label printing industry. Its just expand the application of UV flatbed printer.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

Print what you want to print, with full color to give you a more real experience, high-speed printing without manual after-sales worry-free, high-speed printing, mass production.

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

Good chemical stability, can be stored at room temperature for a long time without deterioration.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.