A3 Impresora DTF 30CM Roll Printer A3 Textil For Heat Transfer Printing With Automatic DTF Shaker

TODOjet DTF printer can offer related consumbles like hot melt powder machine, relased PET film and hot melt powder. We have both 30cm*100m and 60cm*100m roll PET film for option, which used for cold peel transfer. You can printing direct to this film with our DTF printer. And this film is the correct micron thickness for powder shaking machine (automated curing machines).

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.

The heat press machine can heat various heat presses on cotton, linen, chemical fiber and other fabrics by heat transfer, and can also perform heat treatment processes such as screen printing, mucilage, foaming, etc. Landscape patterns, etc. are baked on porcelain plates and metal plates, which are especially suitable for making medals, commemorative cards, cultural shirts, etc. It is economical and practical, and the patterns are exquisite. It is replacing traditional embroidery and screen printing, and the cost and effect are much lower and better than general embroidery and multi-color screen printing.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

UV printing is a unique method of digital printing utilising ultraviolet (UV) light to dry or cure ink, adhesives or coatings almost as soon as it’s hit the paper, or aluminium, foam board or acrylic – in fact, as long as it fits in the printer, the technique can be used to print on almost anything. UV ink is not poisonous. Although UV ink curing is not poisonous, but not completely harmless. Because UV ink still has certain irritation and corrosive to the skin. But if you choose a green UV ink, you can avoid this situation.

Accuracy: Variable Droplet High Quality Printing
Variable Droplets for Beautifully Smooth Gradients: Features a variable droplet feature that prints ink into 3 different sizes of droplets at once

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

At present, the most widely used laser films on the market mainly include laser aluminized films and laser bronzing films.

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Inkjet technology utilizes tiny droplets of ink to facilitate direct printing without the device coming into contact with the printing surface. Because the technology supports non-contact printing, it can be applied to a variety of media and is now being introduced into a wide range of fields from general-purpose to industrial.

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

Heat transfer has high requirements for the selection of ink, hot melt powder and transfer film, which is related to the quality of printing and the service life of the machine. The supporting consumables recommended by our factory are the optimal quality and the best supporting scheme.

TODOjet is a good UV printer supplier in China,we have full series small UV printers with good quality.In order to let more customers know our printers and lastest technology,we attend many exhibitions every year, such as DPES expo in Guangzhou, APPP Expo and Sign China Expo in Shanghai. We also attend many famous oversea exhibitions in printing field, such as FESPA exhibition, SGI exhibition,etc. We have 100 pcs A3 UV DTF Film A and film B with high quality .

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

Professional team：Provide one-to-one professional pre-sale, in-sale and after-sale service. If you have any questions, please feel free to contact our customer service. We will serve you wholeheartedly.

TODOjet offers premium quality DTF ink for Epson printers and printheads. These are specially formulated direct to film printing inks designed to work with a wide variety of DTF printers.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

TODOjet DTF printer factory can offer you one-stop solutions like hot melt powder,PET film and pigment ink.We have different pacakge of hot melt powder like 1KG,2KG,5KG and 25KG. Also we have black hot melt powder for your option! For more DTF printer consumables,welcome contact with us!

Laser film is a high-tech and environmentally friendly new material developed at the beginning of this century. It can be used to produce composite laser cardboard and transfer laser cardboard through a special production process.

Thermal transfer heat transfer has a wide range of uses, a wide variety of processes, and the effects are constantly updated. The names are different, also called hot stamping, transfer printing, etc.

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

TODOjet UV Film has good adhesion, good smoothness and high brightness. Insoluble colorful powder, luminous powder, strong yellowing resistance, good folding resistance and adhesion, excellent printing adaptability, good leveling and defoaming.

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.