Powder shaking and curing machine for DTF printer

RGB color model refers to the three primary colors of light: Red, Green, and Blue,the three primary color light with different proportions of the sum, can produce a variety of color light, in theory, red, green, blue light can be mixed out of all colors.

DTF Printers are an alternative process to DTG printers for T-shirt printing or other garment printing,this direct to film printer use water-based pigment ink to print a film transfer. Once the ink is dry, powdered glue is applied to the back. Now it is heat cured ready for storage or instant use(here need a powder curing machine). It makes no difference on cotton, silk, polyester, synthetic fabrics, genuine leather, or synthetic leather – the DTF printing process can be applied to all of them.

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

High quality DTF shaker powder shaking dryer, usually together for XP600/4720/i3200 DTF printer or other DTF printing machine. Mainly used for hot melt dusting and curing during printing. We have different powder shaking machine can meet your different printing speed like 2 head printer powder shaker and 4 heads printer powder shaker.

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

①The surface of the heat transfer film is dry, the powder is clean, and the hot tear, warm tear, cold tear, and easy tear
②100% ink volume can be typed at will, no ink gathering and no ink flow
③The printed pattern does not reflect water and has no water edge

UV Curable Varnish UV Primer Liquid For UV Flatbed Printer machine varnish coating for phone case acrylic glass wood

Print what you want to print, with full color to give you a more real experience, high-speed printing without manual after-sales worry-free, high-speed printing, mass production.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

Original i3200 pinthead i3200 A1 E1 U1 head for Eco Solvent Sublimation Water-Based UV inkjet printer
1. Product Name: i3200 head
2. To be used for : Printer with sublimation ink,. textile printer
3. Weight: 0.3kg
4. Print nozzle qty: 3200 pcs

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

1.Up and down cap station,Better seal performance for the printhead
2.Temperature control,Front and back, 2 stage heating
3.Hiwin guide rail,Printing more stable and quiet
4.Good working performance,Fluorescent orange and green are support

1. Source manufacturer, free proofing, lifetime maintenance
2. Personalized customization, unlimited fabrics, suitable for pasting in various shapes
3. Simple operation, Liyin Lidry, one-time molding

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

White Ink Heat Transfer Scheme>>
Bai Caitong comes out with an environmentally friendly paint scheme, which is a subversive heat transfer process.
It solves the problem that the direct-injection printing process is picky about fabrics, and the new heat transfer is not limited to material transfer.

Among them, there is a question about the name of the printer. Also did a research. Crystal label is just a market segment application of UV printer, so you can call it crystal label printer, UV printer or crystal label UV printer.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment