DTF powder machine–shake and bake function

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

Professional team：Provide one-to-one professional pre-sale, in-sale and after-sale service. If you have any questions, please feel free to contact our customer service. We will serve you wholeheartedly.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

The most widely used laser films on the market mainly include laser iridescent film, laser dielectric film, transparent laser film, laser dielectric film, etc.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

Laser film is a high-tech and environmentally friendly new material developed at the beginning of this century. It can be used to produce composite laser cardboard and transfer laser cardboard through a special production process.

Factory delivery: provide technical guidance ink/powder/heat transfer film offset heat transfer printer one-stop supply,Use the special paint ink for transfer film to print the pattern on the PET film, directly remove dust, no need to cut, no need to discharge waste, and the fast transfer of natural hollowing is suitable for any fabric.

The UV-curable ink is cured and adhered to the media or substrate by UV radiation. The print is already dried when it comes out of the printer, allowing a short delivery request to be met. Printing on non-absorbent materials, including plastic, glass, and metal, is available. To give shape to ideas, TODOjet offers a range of UV-curable ink products to meet demands from various industries

The advantage of white ink heat transfer is that it can transfer high-precision pictures and other colorful pattern designs. The actual effect is quite close to the computer hand-painted manuscript. The lack of part: if you touch it hard, you will feel a strong sense of collagen fibers, and the ventilation effect is not good. If you only do simple pattern decoration design for clothing products, bags, and pillows, then you don’t need to consider the ventilation problem.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

TPU hot melt powder is widely used in DTF transferring process,and you can see both white and black powder in the market,but which one is better? TODOJet can offer you a good solution.

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

Its characteristics are: as long as the mild bonding conditions can obtain excellent washing fastness (up to 60 degrees water temperature washing) and dry cleaning fastness

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

A Comprehensive Guide to Identifying and Selecting Quality PET Film
In the dynamic world of Direct-to-Film (DTF) printing, the quality of your PET film serves as a linchpin in the pursuit of exceptional results. To empower your printing journey, it’s vital to delve into the nuances of identifying and selecting top-notch PET film. Here’s an extensive guide brimming with valuable insights to navigate this critical aspect of DTF printing:
Tip 1: Vibrant Color Saturation Achieving stunning colors starts with top-notch ink and a professional ICC profile. Opt for a DTF film boasting a superior ink-absorb coating layer for optimal compatibility between ink and film.
Tip 2: Precision in Printing Address issues like holes, especially in black-colored prints. Choose a high-quality DTF film to enhance the precision of your prints and mitigate potential problems.

It is worth noting that the materials that can be printed on Koch’s digital heat transfer include cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA, etc. There is basically no limitation on fabrics.

TODOjet DTF printer can offer related consumbles like hot melt powder machine,relased PET film and hot melt powder. Transfer PET film with 30cm*100m and 60cm*100m size. Hot melt powder with good adhesive effect,we have white melt powder and black melt powder for option. As to inks, we can offer high quality white pigment ink, cyan pigment ink, magenta pigment ink, yellow pigment ink, and also fluorecent color ink like fluorecent orange and fluorecent green.
As professional DTF printer manufacturer, we not only offer the machines, also offer you full solutions.

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

1.High-precision guide/platen roller: precise pressure paper to ensure the stability of the printed pattern
2.Ink tube: transparent ink tube, check the ink status, indicate the color
3.Dual-nozzle printing: each nozzle has eight rows of 180 nozzles, easy to install and adjust, and can output high-precision images of 1440dpi
4.Servo motor: Ensure good printing precision

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.