How to buy 2022 new technology direct to pet film printer with dtf shaking powder & color fixing machine dryer heat transfer?

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

DTF is a big helper to garment decoration that you cannot ignore.Nowadays, pattern can be seen everywhere, such as T-shirt,glass, phone case,pillow,socks,mask.The patterns on the pet film that DTF printer prints make our life more interesting.One of the benefits to DTF Printers is there is no need to use pre-treatment.New generation DTF PET Film Printing Machine with hot melt powder Shaking machine with new technology for garment printing. When the film is dried out, it can be used to transfer print onto the garment. Which can to be press on both dark and light Garments like cotton, polyester, spandex, leather, nylon and more.

Advantages of AGP DTF Printer:

1. Good quality, choose the best quality material to ensure long service life of the machine
2. After-sales service number, a strong technical team for after-sales technical support, to ensure the normal production of customers.
3. Years of equipment R & D and manufacturing and many years of experience in traditional printing.
4. The operation is simple and easy to understand. After 2 hours of training and learning, you can start the machine and start shipping immediately.

CMYK+ Fluorescent Color+ White
Printhead: 2PCS EPSON F1080
Printing width: 30cm
Printing Speed: 4.5sqm/h (about 15m/h)
Software: Maintop/Photoprint
Ink type: Pigment Ink

It can be applied to silk, silk, etc. Because the material is relatively thin, it is easy to faint, and auxiliary tools are needed to solve the problem of bleeding.

ذاتي ڪسٽمائيز ماڊل ڊسپلي، ذاتي ٽي شرٽ، ٽيم يونيفارم، ڪم يونيفارم، ڪلاس يونيفارم، جرسي، سامان، وغيره.

Heat transfer is widely used in T-shirt printing. When choosing to customize, we should focus on the color of the pattern and the method of heat transfer, and decide the way to tear off the film. Now there are mostly two ways in the market: hot peeling and cold peeling. Next, we will analyze these two ways from the following aspects: composition of the ingredient, pressing temperature, pressing time, film tearing time, glossiness and so on.

TODOjet is proud to announce our new flagship Direct-to-Film Transfer Printer, the TODOjet A3 DTF Pro

Taking the fast fashion on-demand market by storm, this revolutionary DTF transfer printer has a whopping machine output that is up to FIVE TIMES faster than DTG machines which cost thousands of dollars more.

TODOjet is a professional UV flatbed printer manufacturer which established in 2009,and now we have several product line such as UV printer, DTG printer and DTF printer.Currently the DTF printer is really popular in the market, its direct print to film printer then transfer on any fabric materials.

1.Adopted Dual Epson I3200/4720 print heads,1440DPI,high resolution and stability.
2.Use high quality aluminum alloy sections, TAIWAN HIWIN high-precision linear rail system
3.High quality raw materials

DTF is also referred to as Direct Transfer Film, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates). There are many compatible fabrics including cotton, nylon, leather, and polyesters. This is unlike DTG technology which only works on cotton fabrics.

1.White ink circulation Constant temperature control
A3 series products are equipped with offset printers as standard, with built-in white ink circulation and constant temperature control functions, so that print heads can be printed anytime, anywhere, without clogging, and without being affected by ambient temperature.

A3 DTF Pro Printer and transfer machine is a special equipment for hot stamping various transfer printing papers and thermal transfer printing. It can control temperature, time, pressure, durability, easy operation, small size, flexibility and low cost.

Adopt 1080 printing nozzle, color is more fulland delicate, stable print is clear
inkjet is smooth with white membrane circulation system
Solve the problem of nozzle blockage

Fast printing speed Direct to Film Printer A3 DTG heat transfer inkjet printer with 5 color ink white ink,The image quality is comparable to Class A heat transfer. Clothing digital printing is actually the digital direct injection in the industry, and the pattern effect of direct injection is also good. Now there are small digital direct injection machines, which are relatively simple to operate. They are suitable for making clothing DIY, team clothes and the like.

A variety of fabric printing to meet your needs All fabrics such as knitted, textile, nylon, non-woven, oxford, etc. can be hot stamped, which can easily achieve photo-level effects.

1、Fast version: the transfer of the map can be published, no need to film the sun screen version

2, save space: about 3 meters long and 1.8 meters wide, covering an area of only five or six square meters, small space can also be put more than one machine.

3, save labor: one person to see more than one machine, and save the screen, plate, sun, paste adjustment, go board, laying cloth to receive cloth and other complex processes.

4、Simple operation: only need to know a little computer to operate, call people at any time during the peak season, without the constraints of professional printing workers

5、Single piece printing: one piece can be printed, suitable for small batch net single and personalization

6, bright colors: color color saturation is high, the real color is pure enough, the pattern performance is delicate and realistic

7, wide range of applications: printing factories, garment factories, personalization, net single sales and other craft plants can be used, the product can be applied to clothes, pants, hats, bags, home textiles, etc., adaptability is relatively strong.

8, environmental protection: waterless, tasteless, smokeless and dust-free production process, pollution-free green environmental protection, in line with national environmental protection requirements.

TODOjet hotsale A3 DTF printer with how melt powder heating machine, this direct to film printer can feed in 30cm width PET film, printing speed reach to 15m/hour.This PET film transfer technology is suitable for any kind of textile fabric printing,especially for garment printing like T-shirt,sweater,canvas bag and so on.

TODOjet 60cm DTF printer support 2~4 pcs i3200-A1 printhead option, you can choose different configurations according to your production. Meanwhile,we can also offer you the related powder machine and other consumables like cold-peel or hot-peel PET film,hotmelt powder and pigment ink.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Our TODOJet A3 DTF Printer is specially used to print on any fabrics, it is no limit of fabric materials. No need pre-coatingNo need plate making, No need contour cutting. The ink is environment-friendly pigment ink. The effect is exceedingly real and vivid. And the Fluorescent color in your goods will be the important feature in your business. our printer supports 2 Fluorescent color, of course, you can use only one just adjusting the picture before printing.

DTF Printing is also referred to as Direct To Film Printing, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates).TODOjet A3 DTF Printer usually together with powder shaking machine.If you purchase full set TODOjet DTF printer,you can print on any kind of fabric, no matter dark or light. There can be more varieties in your product line. Save labor costs, and one employee can operate the machine.No need pretreatment like DTG printer,also no need making plate like screen printer. Our A3 DTF with two printhead support faster production like 1000+ T-shirts LOGO printing in a day.

TODOjet DTF Transfer film can apply to cotton,leather, nylon, polyester, denim,wood, metal, glass, and ceramic.Each print lasts over 50 washes with no distressing.

Direct to film printing is an exciting addition to the inkjet garment decoration process that requires no pre-treatment even for white ink. More solution about DTF printing like reflective color printing or breathable function printing,kindly contact with TODOjet team.

1.Double Epson XP600 print heads, color and white at the same time.
2.Automatic lifting and lowering ink stack, made of aluminum plate, with better sealing performance,and improving the life of the print head.
3.The two-stage heating of the platform (front/rear) makes the material have better ink absorption.4.The printing speed is improved, and the printing picture is clearer.

With more than 12 years of experience in the printing industry, we keep up with market new trends, develop new-technology printers. We can provide professional pre-sale printing solution guidance and efficient after-sales technical support.The finished products of DTF Printer have been widely used in cloth print, home and personalized design.Do you want to know how much you could earn every day?

1. This equipment is a new generation of digital revolution, pioneering and leading a new digital heat transfer process.
2. This equipment makes up for the shortcomings of the existing process. It only needs printing + pressing, and the printing can be done in two steps.

☆TODOjet DTF printing is a new tech,The work flow as follow:

1. Design picture by the Photoshop

2. Printer printing picture by color +white on our PET film.

3. Powder drop on the picture and goes through the heater machine.

4. The powder adhesive onto the picture by high temperature.

5. Cut of the finish film and then transfer them onto your fabric by heater pressure machine

The pandemic has led small studios to focus on print-on-demand production, and with it, DTG ink and DTF ink printing have entered the market, increasing the interest of manufacturers who want to start using personalized garments. The DTF market is promising. We cold know more about DTG and DTF Printer.

1. Select the print image and select it on the computer, you need to make the print pattern.
2. Double head heat press machine Epson double head/four head, color ink/white ink print pattern at the same time.