Small Digital A3 PET Film xp600 dual head 30cm roll to roll DTF Printer With Powder Shaker

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

As prefessional DTF printer manufacturer, TOODjet can offer you full size DTG and DTF printer. Meanwhile, can also offer one stop solution of hot melt powder machine, heat press machine and also consumbles like pigment ink, hot melt powder,pet film and other parts that you need.

Main products of TODOjet
DTF Printer and DTF Powder Oven (A3,60cm,120cm size) Widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc.

UV Flatbed Printer (3050,6040,UV6090,UV1350) Widely used in textile, plastic sheet, metal plate, acrylic sheet, wood board, leather, glass, phone case, ceramic tile, etc.

All kind of consumables for DTF solution DTF powder, DTF ink, DTF film, UV ink, UV AB film, etc

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

Main Features
1) Stable ink supply system, make sure the continuous ink supply during the long time work..
2) Reliable machine parts, ensure the longer working life of whole machine body.
3) Experienced engineer service, we can help you solve the problem on time.
4) Marking specialist service, we could support you not only the machine, but also we can tell you the most popular market information and help you win the market.
5) Teaching video will help you install the machine step by step.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

printer advantage :
Front and rear arc plate heater;
Platform suction;
white ink circulation &stirring all with ink shortage alarm ;
Anti collision ofnozzle;
One key automatic cleaning;
Integrated auto-lifting ink station;
LCD + multi function operation key board

1. This equipment is a new generation of digital revolution, pioneering and leading a new digital heat transfer process.
2. This equipment makes up for the shortcomings of the existing process. It only needs printing + pressing, and the printing can be done in two steps.

Printer head : For EPSON XP600 Printer head
Maximum printing width : A3/310mm
Printing speed : 6Pass:3m/h 8Pass:1 .5m/h
Printing software : Maintop 6.1

Automatic powder shaker

Features introduction

1.Quick Control Panel
Ultra-simple operation panel
Adapt to the public, free training

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

Printer not printing colors correctly is a common problem printer owners experience from time to time. Printers can be pretty confusing machines. what if the printer that you just bought suddenly decided to stop printing colors right. How are you going to print now? Today, we’re going to help you fix your printer not printing in real color and tell you how you can prevent this printer issue from reoccurring.

What is a DTF Printing? DTF – Direct Transfer Film is is a revolutionary new printing technique that’s more affordable and accessible compared to DTG, screen printing, sublimation or laser white toner transfers. It gives the advantage to any person to print transfers to decorate on cotton, polyester, 50/50 blends, leather, nylon, and more without the need to press A+B papers like in white toner printers. It can transfer to any material garments. It is taking the T-shirt decorative industry to a new level. Now, please see our A1 DTF Printer.

The primary characteristic of DTFprinter is that it enables the freedom of using any fabric. The DTF printing machines are compatible with various materials and produce colorful and durable designs. Various materials can be cotton,silk,canvas,polyester,denim,nylon and so on.

1.Versatility on materials : DTF can be applied on a wide range of materials including cotton, nylon, treated leather, polyester, 50/50 blends and more (light and dark fabrics).
2.Cost-effective: can save up to 50% white ink; supplies are also significantly more affordable.
3.Wash ability: has been proven through testing to be equal to if not better than traditional direct-to-garment (DTG) printing.

Heat transfer is widely used in T-shirt printing. When choosing to customize, we should focus on the color of the pattern and the method of heat transfer, and decide the way to tear off the film. Now there are mostly two ways in the market: hot peeling and cold peeling. Next, we will analyze these two ways from the following aspects: composition of the ingredient, pressing temperature, pressing time, film tearing time, glossiness and so on.

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer.

1.Spirit level
Intuitive machine balance
2. Peristaltic pump device
Extend the life of expensive printheads

A3 SIZE WHITE INKPET FILM PRINTER& AUTOMATIC DRYING AND SHAKINGPOWDER INTEGRATED MACHINE
NEW RESOLUTION FOR UNIVERSAL PRINT
TRANSFER PRINTING ALL KINDS OF FABRICS
FREE TEACHING +LIFE-LONG AFTER SERVICE
REPLACE PLOTTER CUTTER & HTV

Garment printers can print on various rolls or sheets of materials, such as: thermal transfer film, film, self-adhesive, PU film, etc. At present, the most popular application is in the clothing industry.

DTF Printing is also referred to as Direct To Film Printing, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates). When you have this machine, you can print on any kind of fabric, no matter dark or light. There can be more varieties in your product line. Save labor costs, and one employee can operate the machine.

New Technology DTF PET Film Transfer Printer：
1. You do not need to pre-process the clothing.
2. After printing on the PET film with a DTF printer, it can be directly transferred to the T-shirt by a heat press, which is faster and has better results than a DTG printer.

Differences in pattern feel and washability
(1)Offset heat transfer, soft to the touch after hot pressing, skin-friendly and comfortable to wear, stretch-resistant, wash-resistant, dry and wet rubbing fastness up to grade 4, and it will not crack and feel offset after dozens of washes.
(2)Traditional heat transfer has a cold and hard texture, and it is not breathable to wear. It looks like a hard piece to the touch, and the adhesion is not strong. After washing several times, it will crack and fall off, and there will be a sticky glue feeling.

TODOjet DTF printer can print on PET film directly and then transfer on any kind of fabric materials by heat press machine. No need to pre-process the clothing. which is faster and has better results than a DTG printer. And also more stable than modified L1800 printer.

TODOjet the new offset heat transfer solution of digital offset heat transfer printer is as clean as coarse powder and fine powder, free of engraving and waste, soft pattern, breathable and skin-friendly, and the printable materials include cotton fabrics, high-elastic fabrics, Nylon fabric, chemical fiber fabric, swimwear, denim, PVC, EVA, etc.

Epson F1080 nozzle Precisioncore technology
ALL MEMS (Micro-Electro-Mechanical Systems) manufacturing process and the adoption of thin-film piezoelectric elements enable the realization of high-precision nozzle hole arrangement (360npi/2 rows), making the print head compact in structure, fast in speed, good in quality and durable in use.
The precise nozzles and ink channels made by Epson’s unique MEMS technology make the ejected ink droplets close to a perfect circle and precisely positioned at the same time.

1.Machine: full set-up instruction video and files ,worry free for the equipment connection and solution.
2.Ink:special with quality assurance.
3.Hot Melt Adhesive Powder:even powder to make sure excellent hand feeling and smooth image surface.
4.PET Film: hot and cold peeling available.

TODOJet A3 DTF Printer with two original F1080 printhead –fast speed and more stable than L1800 modified printer. It uses roll to roll film printer and combine with hot melt powder shaking machine,the finished film can be used for press on any fabric.