Roll to roll DTF transfer printer professional printer supplier  TODOjet China famous Factory manufacturer

1. High transparency and can’t tear.
2. High contrast, high definition, can be used for high quality photo image output.
3. stable performance, long-term effective, no change of ink receptivity.
4. Physical imaging directly, transfer rate is 100%

TODOjet A3 DTF printing machine with more stable mainboard system, two original F1080 printheads, white circulating system, front and back heating function, roll to roll rewinder system, fluoresent ink printing solution and breathable printing solution.

Unique print head: dual Epson XP600 print heads, both in color and white. The white ink mixing and circulating system function does not block the nozzle and keeps the ink continuously.

❈ No pre-treatment: In DTF Printer, there is no need to pre-treat the fabric because it is pre-printed on the film and must be transferred. 
❈ Printing on film: In DTF, we print on film and then the design must be transferred to the fabric. This can make the process a little longer compared to DTG. 
❈Adhesive powder: This type of printing requires the use of Adhesive powder, which is applied immediately after the ink is printed on the film. On printers created for DTF, this step is included in the printer itself, so you can avoid any manual steps. 
❈ Using white ink: In this case, a layer of white ink is required, placed on top of the color layer. This is the one that is transferred to the fabric and used as the basis for the main color of the design. 
❈ Any type of fabric: One of the advantages of DTF is that it allows you to use any type of fabric, not just cotton. 
❈ Transfer from film to fabric: The final step of the process is to remove the printed film and transfer it to the fabric using a press. 

TODOjet DTF transfer printer with I3200-A1 printhead, widely used in any fabric material.As professional DTF digital printer supplier, TODojet can offer high quality machine and better after-sale service,wholesale price and OEM service

The AGP DTF Printer is not just a piece of machinery; it’s a comprehensive solution that redefines the landscape of clothing printing. Here are some key features and parameters that make the DTF-C30 an unparalleled choice for businesses:

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

The relationship between the temperature of the transfer and the time is a matter of operating skills. If the time is too short, the temperature is not enough, and the ink transfer is insufficient, it is also the main reason for the light color.

TODOjet is one of the best DTF printer PET film printer suppliers in China, which can offer you full series DTF printer, from A3 size to large format size DTF printer, we can also offer you i3200 printheads printer, 4720 printhead DTF printer, and also XP600 printhead printer. Besides this, we can also offer you other consumables such as hot melt powder, PET transfer film, powder machine and heat press machine. Our A3 DTF will satisfy the wholesale business and the retail business.

1. Select the print image and select it on the computer, you need to make the print pattern.
2. Double head heat press machine Epson double head/four head, color ink/white ink print pattern at the same time.

One stop solution of TODOJet DTF printer. TODOjet is a professional supplier, besides UV printer and DTF printer,we can also offer you one stop solution with related consumables, such as UV ink, pigment ink, pet film, powder machine,etc.

TODOJet A3 DTF Printer with two original F1080 printhead –fast speed and more stable than L1800 modified printer. The speed can reach to 4.5~5 sqm/h, which means one roll material (30cm*100m) just need 6 hours. And one roll PET film can do 250pcs (A3 size) T-shirts. If just LOGO, maybe can do more than 1000 pcs T-shirts. And it can be suitable for any kind of fabric printing.

TODOjet new arrival A3 DTF Printer support fluorecent color printing and breathable printing solution. Fluorecent orange and fluorecent green are most popular colors,you can check the printing video with good effect. As professional supplier, we offer you the one stop solution like pigment ink, PET film together with DTF printer.

It is recommended to use the TODOjet A3 DTF Pro Printer 6-color fluorescent green fluorescent yellow new solution with fast speed and high quality. After printing, wait for the ink to dry, and then pass the thermal transfer.

Multi-mode Printing,Variable gray scale,multiple waveforms,ICC curve, etc.
Reduced Noise Printing. quiet printing to reduce noise pollution
Variable Ink Drop Technology, Precise and controlled ink droplet size

TODOjet 60cm DTF transfer printer configuration with 2 or 4 pcs i3200-A1 printhead,fast speed can improve the production efficiency of T-shirt printing.And our PET film printer also support neon color/reflective color printing.

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

Japan THK guide rail stable and low noise.
The printer has anti – rubbing paper device to protect the nozzle and extend the life of the nozzle.

DTF printer is a new innovation technology in garment field. DTF means direct to film.The process of direct to film printer is to print on a film and directly transfer it onto fabric. Very simple and convenient than other traditional printing.DTF printer can be applied to cotton,polyester,linen,nylon,canvas and leather etc.The DTF printing process will work its magic on them.

DFT Printing can be used to make beautiful designs on textiles. With this technique it is possible to print a full color transfer and without cutting or plotting we can transfer the print on te fabric. For the transfer we use a heat press at about 170 degrees celsius.

Different from the traditional printing process, white ink heat transfer printing does not require complicated plate-making parts. During the entire printing process, no water is used, and no staff is required to prepare the color paste. After the machine is set up, the ink cartridge is installed. , start the printing mode, the machine will distribute the amount of ink used according to the needs, and directly print the ink on the printing release film and then transfer it to the clothing.

TODOjet white ink heat press machine, the main head adopts Epson i3200 industrial-grade high-speed print head, the printing speed reaches 30 square meters / hour, that is, 20xx20 patterns, and can print 7800 patterns in ten hours a day, which can meet the requirements of mass production, especially suitable for Receive online orders, the order is large and the quantity is small, the pattern can be freely typeset, and the large and small orders can be made.

TODOjet is a professional DTF printer manufacturer in China ,and our printers have been exported to many overseas market such as Europe, Southeast Asia, South America, and Africa.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

TODOjet A3 DTF Printer has automaticlyprinting and cleaning function system,printing+heating+powdering+-drying in one system for DTF PET Film T-shirt Printer ,also called Digital Transfer Film Polyester Printer.
Now just go for inquityng our DTF PETFilm T-shirt Printer Digital Transfer FilmPolyester Printer.

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

We have installed the print head when leaving the factory, this is to save unnecessary manpower, and we have adjusted the print head properly when leaving the factory. When the user receives the machine, they can inject ink and print, which saves the technicians in each installation. The time for one machine is enough, and skilled users can also install the machine by themselves.

The DTF A3 digital white ink heat transfer machine is a small printing and drying all-in-one model. Its footprint is as small as a motorcycle, and it is easier to operate with a PLC touch screen, greatly improving work efficiency, ease to use, and office customization.

What is a DTF Printing? DTF – Direct Transfer Film is is a revolutionary new printing technique that’s more affordable and accessible compared to DTG, screen printing, sublimation or laser white toner transfers. It gives the advantage to any person to print transfers to decorate on cotton, polyester, 50/50 blends, leather, nylon, and more without the need to press A+B papers like in white toner printers. It can transfer to any material garments. It is taking the T-shirt decorative industry to a new level. Now, please see our A1 DTF Printer.

Yüksək sürətli çapda nöqtənin dəqiqliyinə sahib olmaq üçün biz özümüz tərəfindən hazırlanmış patent çap alqoritmini inkişaf etdirdik ki, nöqtə kompensasiyası vasitəsilə qrafikin çap dəqiqliyini təmin edir.