A3 / 30cm PET film printer DTF printers

A point to note:The hand transferred to the clothes will be slightly larger than some films, but it is basically negligible.

Do you know how to print reflective color on T-shirt or other fabrics with DTF printer? Here we can offer you a good solution. 4 printheads DTF printer support nine colors CMYK+W+FM+FO+FY+FG. Superb effect of fluorescent orange, fluorescent green,fluorescent magenta and fluorescent yellow.

Health and environmental protection, smooth inkjet, safe use, on-board testing, high degree of reduction.

Why choose DTF Printer
1.Any fabric textile cloth material, any color, any part printing;
2.Customized garment printing is available;
3.Cost-effective, without high invest of machine and site, a small office is enough to start a home-style garment printing factory;
4.Good effect, the pattern is soft to touch, stretchable and washable;
5.A wide range of applicable materials, such as cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA etc.
6.The DTF printer uses eco pigment ink which is much more economic than DTG ink. It accepts all type fabric heating transfer printing with vivid design.

Heat transfer is widely used in T-shirt printing. When choosing to customize, we should focus on the color of the pattern and the method of heat transfer, and decide the way to tear off the film. Now there are mostly two ways in the market: hot peeling and cold peeling. Next, we will analyze these two ways from the following aspects: composition of the ingredient, pressing temperature, pressing time, film tearing time, glossiness and so on.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

DTF transfers can be applied to any fabric you can fit into a heat press.Tiny garments or very large are no problem. You can even apply to hats if you have the right heat press.

DTF is also referred to as Direct Transfer Film, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates). There are many compatible fabrics including cotton, nylon, leather, and polyesters. This is unlike DTG technology which only works on cotton fabrics.

It is worth noting that the materials that can be printed on Koch’s digital heat transfer include cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA, etc. There is basically no limitation on fabrics.

Three processes of T-shirt production.(Weak solvent hot painting, digital direct spray printing, hot transfer printing hot painting). We have A1 and A3 DTF Printer. Our DTF printer can print on any fabrics directly, for example cotton, nylon, polyester, silk, denim, canvas, blends, which is suitable for different business demands. Furthermore, our DTF Printer has high quality, with good after-sales service. Welcome to know TODOjet DTF Printer！

DTF offset white ink heat transfer ink has been widely used in heat transfer printing industry, and DTF ink is also dazzling in the market. Why do heat transfer printing friends choose DTF ink? What’s so great about it, let’s take a look at it together!

The production process of the digital offset heat transfer and powder-shaking machine is greatly simplified, and the effect of powder-shaking is excellent.

1) Simple structure in linear type, easy in installation and maintation.
2) Adopting advanced high quality components in pneumatic parts, electric parts and operation parts.
3) Running in a high automatization and intellectualization, no pollution.

After ironing, do not squeeze the clothing into a small space. You can hang it on a hanger or spread it flat to keep the clothing flat.

TODOjet A3 DTF printer, can print on any fabric and other kind of materials like wood. This printer usually use mirror printing on the film(first color and then white).And also curing by hot melt powder,which can make sure the adhesive and fix the color well. Then heat press transfer this printed film on other materials’s surface.

①The surface of the heat transfer film is dry, the powder is clean, and the hot tear, warm tear, cold tear, and easy tear
②100% ink volume can be typed at will, no ink gathering and no ink flow
③The printed pattern does not reflect water and has no water edge

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

White Ink Heat Transfer Scheme>>
Bai Caitong comes out with an environmentally friendly paint scheme, which is a subversive heat transfer process.
It solves the problem that the direct-injection printing process is picky about fabrics, and the new heat transfer is not limited to material transfer.

Want one set machines to print on different items such as garment of different material, hoodies, shoes, bags,etc?
Can check this DTF solution.
Compared with the DTG direct to garment printer, this DTF solution is flexible in positioning, and avoid the waste of t-shirt due to any unexpected fault,no need pre-treating, and good for mass production.

Environmentally friendly ink: With many years of digital printing experience, it can handle various fabric processes, the printing effect is lasting, does not crack, does not fall off, soft to the touch and good air permeability!

Hot melt adhesive powder is an indispensable material in Keshi thermal transfer hot stamping stickers. And it has many types according to different compositions and properties, including PA, PES, EVA and TPU hot melt adhesive powder. The market proves that it is more suitable for medium temperature TPU. And our todojet exactly does that, equipping with TPU.

The working principle of DTF Printer is to print the pattern on the transfer film, shake the powder and dry it with a powder shaking machine, and then press it with a hot press to transfer the pattern on the film to various fabrics. A DTF Printer all-in-one machine plus hot stamping printing film, printing ink, hot melt adhesive powder, it only takes 5 minutes to hot stamp a piece of clothing!

TODOjet A3 DTF printer is such a magic machine! Why? Because it can print pretty much all kinds of fabric materials like cotton, silk, nylon, canvas, leather etc. It is small-size, cost-effective, high quality and high efficient so many customers start own business with this magic machine.

TODOjet is one of the best DTF printer PET film printer suppliers in China,which can offer you full series DTF printer, from A3 size to large format size DTF printer.
we can also offer you i3200 printheads printer, 4720 printhead DTF printer,and also XP600 printhead printer. ,br/>
Besides this, we can also offer you other consumbles such as hot melt powder, PET transfer film,poweder machine and heat press machine.

TODOjet 30cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and excellent after-sale service. We also offer wholesale price and OEM service.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

Unique print head: dual Epson i3200 print heads, both in color and white. The white ink mixing and circulating system function does not block the nozzle and keeps the ink continuously.

DTF transfer printer: a super helper for your business.T-shirt Printing Machine works with PET Film Transfer ink + Hot Melt Powder + PET Film Transfer.The appearance of DTF printer is a new craft for transfer printing, which is suitable for all textile matrial printing.

TODOjet is a professional UV printer and DTF printer factory in China, our team is consist of many experienced engineers in UV printer, DTG printer and DTF printer field, we can offer high quality machine and better after-sale service. We can offer wholesale price and OEM service.Recently this 30cm A3 roll to roll DTF printer is really popular, two heads with fast speed and more stable than L1800 modified printer.

TODOjet A3 DTF printer is a classical mode for almost all fabric printing needs. It’s small-sized, cost-effective, easy to operate and profitable. Cotton, nylon, polyester, silk, demin, canvas, blends etc are suitable for A3 DTF printer.