DIY t-shirts with A3 DTF Printer

Powder dryer advantage:
A:Front heat plate
B:Two stage dryers
C:cold fan
D:auto-take up system
E:Rotating Touch screen

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Release film is a kind of hot stamping printing negative in the thermal transfer release film products. It belongs to the cold tearing matte product and is used in water-based white ink;
In the aspect of direct injection printing, the product is mainly made of high temperature resistant polyester film (BOPET film), which has been precisely coated for many times.

The printed PET film can be pressed on cotton, linen, silk, polyester,chemical fiber and other fabrics by heat transfer.It is replacing traditional embroidery and screen printing, but the cost and effect are much lower and better than ordinary embroidery and multi-color screen printing. This PET film is printed by our A3 DTF printer. You can also store these finished films to press, and providing on demand printing for your customers.

Garment heat transfer can be subdivided into colloidal heat transfer and inkjet heat transfer. Glue heat transfer is suitable for batch operation and needs to be printed with a large four-color printing machine, and then coated with adhesive after printing. The cost of plate making and start-up is relatively high, usually at least 500 copies can be used in this process, otherwise the cost is too high.

DTF offset white ink heat transfer ink has been widely used in heat transfer printing industry, and DTF ink is also dazzling in the market. Why do heat transfer printing friends choose DTF ink? What’s so great about it, let’s take a look at it together!

The main board of the printer is mainly composed of Hansen board and Lexie servo motor combined with Epson I3200 high-definition printhead, and the performance is more stable.
The secondary ink supply system is adopted to ensure continuous ink printing for a long time to ensure the output quality of the picture. The Japanese THK silent linear guide rail is adopted to make the movement more stable and the service life longer.

DFT Printing can be used to make beautiful designs on textiles. With this technique it is possible to print a full color transfer and without cutting or plotting we can transfer the print on te fabric. For the transfer we use a heat press at about 170 degrees celsius.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

It is recommended to use the TODOjet A3 DTF Pro Printer 6-color fluorescent green fluorescent yellow new solution with fast speed and high quality. After printing, wait for the ink to dry, and then pass the thermal transfer.

TODOjet DTF Printer
1.Automatic white ink mixing,so that the white ink does notprecipitate
2.Pre heating after printing:make the ink solidify initially,it will not flow on the film
3.Temperature & humiditydisplay: convenient forcheck

As professional DTF printer supplier, TODOjet can offer you complete solutions such as breathable solution which is suitable for summer fabrics. Meanwhile, we can also offer you fluorescent color printing such as fluo orange and fluo green.We also have other advantages: white ink stir and circulate system,ink lack alarm for every color.DTF Printer, this kind of new printing technology greatly improve productivity and efficiency,

PET transfer film technology is widely used recently, and the application covers clothing, shoes and hats, toys, bags, bedding, daily necessities, etc. In the other hand,it can be transferred on hard materials like the wood board. Anyway,this new technology has gradually replaced the direct traditional printing, leading the trend of The Times.

New generation A3 DTF PET film Printing machine with hot melt powder Shaking machine with new technology for garment printing.The printed & dried be used to transfer print onto any kind of fabrics. Which can to be press on both dark and light garments like cotton, polyester, silk, cotton, spandex, linen,leather, nylon and more.

The TODOjet heat transfer printer adopts intelligent integrated operation, and the finished pattern printing products are relatively perfect; and the use and operation are simpler, labor-saving, cost reduction, and performance-free integration. Stable, new appearance, high-end atmosphere, more user-friendly design, easy to operate, English operating system, Epson XP600 dual-nozzle print output, more realistic drawing and better printing accuracy.

Direct to film printer is a kind of printing machine, which can be printed on the clothes, cups, plates, hats, stones, glass, metal, etc., clothes and cups on the most printed. You can open a hot painting shop, with a small investment cost and a promising market, which is also suitable for individuals to open a business.

The principle is to print a digital picture through a printing machine in a special transfer ink on a special transfer paper, and then use a special transfer machine to transfer the picture to the appearance of the product to complete the printing of the product.

Printed products: T-shirts, silk scarves, silk paintings, pillows, leather handbags, leather wallets, leather uppers, leather paintings, leather belts, etc.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

When we want to know the DTF printer, the following information is important. Firstly, it has Automatic roll-to-roll DTF line, and it could print on any A3 size T-shirts. Secondly, We have auto feeding and take-up system. Meanwhile, there is front and rear heating, auto ink supply, white ink circulating and stirring. As for the Print material, it can be the Swimsuit, Diving suit and so on. Regarding the Printable Media, that could transfer to cotton, nylon, hat, etc.

You could try our A3 DTF Printer. Maintenance method of T-shirt and cotton textile after transfer printing?
1. Just transferred T blood will have a little hard, the feeling, you will become soft after washing.
2 The newly processed T-shirt must be cleaned up after 2 hours. Turn the clothes over to the reverse side and wash them.
3 Do not rub the surface of the T-shirt (the surface material does not attach dirt).
4 Do not wash with a detergent containing bleach.
5. Wash with warm or cold water below 40 C.
6 Try not to use a washing machine.
7 After washing, do not use the clothes dryer to shake dry.
8 Dry naturally and do not twist your clothes. Don’t expose your T-shirt in the sun.
9. If the clothes need to be scalded flat; dry can use medium temperature steam ironing (including elastic fiber can not be irat high temperature, so as not to damage the tissue structure of elastic fiber. influence
Clothing elasticity effect), do not iron directly on the pattern.
10 After Ironing. Do not plug clothings into narrow space, can use coat hanger county hang or flat spread, in order to maintain clothings flat appearance.

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

TODOjet launched new modelA1 A2 A3 A4 UV printer,which can print on film directly and then transfer on any object. As this PET film printing function(film with glue),now more and more people call it UV DTF Printer. This function is very suitable for irregular objects and ctystal LOGO sticker or label industry.

60CM DTF Printer
No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

The printer supports a variety of rip software.
The printer occupies a small space and has low noise, which is very suitable for small factories for production.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

On June 18-21, AGP was invited to participate in APPP EXPO in Shanghai. The exhibition was very successful and attracted a large number of customers to stop and consult. The business team has always been enthusiastic and patiently explained to every visiting customer, which is well received!

TEXTEK A30 30cm A3 DTF Printer Epson XP600 PET Film Sticker Transfer Printing Machine T Shirt Business 2024 is a budget-friendly direct to film printing machine. Powered by dual Epson XP600 print heads, the A30 is a user-friendly printer that you can use it for your T shirts business in 2024.

DTF Printing has arrived!
Introducing DTF’s newest product line, DTF inks, DTF Film, DTF Powder and more. Choose from budget friendly DTF Printers, or industrial capacity, high volume dual print head DTF turnkey solutions.