CMYK+ Fluorescent Colors+ White for our A3 DTF Printer

All Fabric&Color can print by our DTF Film Printer with Auto Powder Shaking. Our A3 DTF with two printhead support faster production like 1000+ T-shirts LOGO printing in a day.No matter how small or complex patterns can be printed.The colorful pattern is necessary for our daily life to make the world beautiful,which can be seen everywhere.There are various patterns on your socks,wallet,mouse pad, pillow and umbrella. Our DTF printer is suitable for different business demands.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

30cm roll to roll printer with two F1080 printhead, more stable and faster than L1800 DTF printer. And this direct to film printer usually together with the powder curing machine which can improve your production efficiency.

DTF printer usually used together with powder dryer machine,we printing on the PET film first with special pigment ink,and then a powdered glue is applied to the back and then heat cured ready for storage or instant use. Compare to DTG printer, DTF no limit about the non-cotton fabric,and no need pre-treatment, also this way can work out not the mass printing.

The production process of the white ink heat transfer printing scheme is mainly the mirror image of the printer printing pattern. First, the color ink is printed, and then the white ink is printed; then it needs to be dusted, shaken, and dried to form.

White ink heat transfer digital printing is not limited to fabrics, pure cotton, blended, denim, luggage Oxford cloth, etc. All can be printed, gift box printing has a better solution for large goods, such as UV flatbed printer, the effect of printing gift boxes is far higher On a white ink heat press machine. You can make small objects such as personalized gift boxes and cups for your family to play, make money from production and processing, or print fabrics.

DTF printers are not limited by patterns and can be printed no matter how complex. And the new A1 DT printer can provide printing solutions for personal use and purpose.A1 DTF printers are faster and more accurate. At the same time, it has a strong sense of visual stereo. Feel very good. Various colors, material environmental protection, rich three-dimensional effect and other characteristics.

With 12 years of experience in printing filed, TODOjet can offer you the DTF printer with high quality, professional package and good service. All our T-shirt printers need to through strict quality testing. We offer OEM service for our partners.

Its printing process is simple, easy to operate, the required materials are economical and easy to obtain, and it can be widely printed on various substrates, such as knitted T-shirts, denim, plush, toys, shoes, backpacks, various nylon caps Wait.

Hot melt adhesive powder is an indispensable material in Keshi thermal transfer hot stamping stickers. And it has many types according to different compositions and properties, including PA, PES, EVA and TPU hot melt adhesive powder. The market proves that it is more suitable for medium temperature TPU. And our todojet exactly does that, equipping with TPU.

The printer is equipped with paint ink to directly print the pattern on the PET film, directly sprinkle powder, without cutting, without waste discharge, and naturally hollow out and transfer it to light-colored or white clothes. Or print the pattern directly on the PET film, and then cooperate with the silk screen to whiten the back. After dusting, it can be printed on dark clothes without cutting and discharging waste, and it is naturally hollowed out.

White ink automatic circulation/stirring
White ink is automatically circulated/stirred, effectively suppressing ink precipitation and causing nozzle blockage, and achieving stable white ink output after power-on printing.

1.DTF printer adopts EPSON F1080/XP600 printhead,the speed can reach to 18m/h (30cm width).
2.Complete T-shirt printing solution,low-cost invest,big profits.
3.Convenient,high efficiency and good stability,saving space and time.
4.Excellent printing effect,picture printed is soft, washable and stretchable.
5.Full color printing, light and dark t shirt printing.White ink circulation system.
6.DTF t-shirt printer, All-in-one system,no pre-coating,powder recycle-free.

The problem of inkjet printing paper:some inkjet printing paper can not transfer the image completely, you can choose inkjet printing paper with special coating

DTF Printer, is a new technology, which refers to the heat transfer equipment heated to a certain temperature in a few minutes, and then the image on the paper more realistically transfer to porcelain cups, porcelain plates, porcelain plate, clothes, metal and other materials on a more special processing process.

1. Machine stand
2. Front/rear two-stage heating
3. Plug-in Dalian supply
4. White Ink Stirrer
5. Nozzle area
6. Body

TODOjet Self developed DTF Printer with printing film in and out control system, saving cost, simple and easy to operate.

Advantages
No limit of fabric materials
No need pre-coating
No need plate making
No need for contour cutting
Environment-friendly pigment ink
Small investment, large benefit

The pattern needs to be printed with a UV printer, white + colour ink + varnish. After printing, use a plasticizer to pass over the film, so that the A film adhesive can be easily removed from the B film. Then use alcohol to wipe off the surface layer of the object, put the printed film on, and press it by hand a few times to make contact with the object. After 24 hours, the scratching and rubbing buckle effect is better!

He aha ke kumu o ka waihoʻoluʻu māmā o ke kiʻi i hoʻoili ʻia i ka T-shirt me ka inika hoʻoili wela: Aia kahi pilikia me ka maikaʻi o ka inika hoʻoili, hiki iā ʻoe ke hoʻāʻo i kahi inika hou.

Whether it is small-volume proofing or mass production, as long as there is a picture, the finished product can be printed directly, which is convenient and fast, saves time and effort, and saves time and labor costs.

Convient aux t-shirts de toute couleur de base et de tout type de tissu, universellement applicable. Après l’impression, il n’est pas nécessaire de couper le vinyle, ce qui permet d’économiser du temps et des efforts; économique, et sa sortie est plus importante que l’impression par sublimation conventionnelle ou les imprimantes DTG.Précision et vitesse d’impression inégalées,Peu importe la vitesse à laquelle votre entreprise se développe, elle peut répondre à vos besoins de production de masse.Une production efficace vous rend plus compétitif.

TODOjet 30cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and excellent after-sale service. We also offer wholesale price and OEM service.

CMYK+ Fluorescent Color+ White
Printhead: 2PCS EPSON F1080
Printing width: 30cm
Printing Speed: 4.5sqm/h (about 15m/h)
Software: Maintop/Photoprint
Ink type: Pigment Ink

Heat press printer, white ink heat press printer, white color printing printer, offset heat press printer, T-shirt printer, T-shirt printing machine, sweater printing printer, luggage printing machine, white ink heat press machine, personalized printing printer, clothing printing heat press Printer, short-sleeved cut piece heat press printer TODOjet launched the Epson I3200 white ink heat press printer with original nozzles, which has more stable overall performance, more delicate printing, and longer life of the nozzles.

A3 Dtf Printer occupies a small area and is easy to operate.One person can operate multiple machines.There is no need to engrave and discharge waste and film, which effectively improves production efficiency, does not limit patterns, and is naturally hollowed out and thinner and breathable.High cost performance, no need for high investment in equipment and space greatly reducing investment costs.

Tige de vis et rail de guidage importés: L’ensemble de la tige de vis de la machine et du rail de guidage adopte la tige de vis de meulage en argent importée de Taiwan et le rail de guidage silencieux. Le bruit généré pendant le processus d’impression est considérablement réduit et l’erreur est plus petite. Le curseur et le rail de guidage sont parfaitement intégrés. L’opération de production est plus stable en utilisation.

High-speed nozzle/fine effect
No line breakage, good printing effect, full and delicate colors, stable printing effect, continuous ink, and no head clogging.

Good chemical stability, can be stored at room temperature for a long time without deterioration.

Quick details
Model:TD-A3DTF-Pro
Print head:2*Original Epson XP600
Color mode:CMYK+W/CMYK+W+Fr+Fg
Print width: 30mm
Media feeding: Auto feeding and take up system
Ink supply system Automatic ink supply
White ink stirring and circulating
Power supply: AC 110V/220V,50/60Hz
RIP software: Maintop(standard)/Photoprint(option)