China A3 A1 Size i3200 Epsons Print head A1 Printer DTF Printer For PET Film Printing

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

Q: What are the printhead of UV printers?

A: The printhead of UV printers mainly include the following types: Ricoh, Epson, Kyocera, Toshiba, Seiko, Konica, and the most used ones are Epson fifth-generation printhead, Epson 4720 printhead, Epson tenth-generation printhead and Ricoh G5 printhead, Epson It is a non-industrial sprinkler, the others are industrial printhead.

DTF PET film with different size for your reference, 30cm*100m/roll and 60cm*100m/roll. This anti-static PET film for cold peel, it can feed continously during printing.Meanwhile, we can also offer other DTF printer consumbles like hot melt powder and pigment ink.

Its characteristics are: as long as the mild bonding conditions can obtain excellent washing fastness (up to 60 degrees water temperature washing) and dry cleaning fastness

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Good chemical stability, can be stored at room temperature for a long time without deterioration.

Advantage of uv led ink:
Environmental: No Solvents Penetrate, Ink Safety, No Waste.
Durable, Indoor 10 Years, Outdoor 3 Years.
Robust Image, Cured Graphic
Dry Quickly, Fast Processing.
Direct To rRgid Uncoated Substrates.
To Any Flat Rigid Substrates, Even Small Arcuated Surface. Can Print on Flexible Substrate Like Canvas.
Shelf Life 6 Month For White Ink, Other Colors 1 Year

At present, the most widely used laser films on the market mainly include laser aluminized films and laser bronzing films.

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

TODOjet is a professional DTF printer supplier,we can also offer you one stop solution with related consumables, such as pigment ink, pet film, powder machine,and hot melt powder etc.If you have good quantity,we can offer you wholesale price.

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

Shaking powder fixing machine
Accurate alignment of printed patterns
Hot melt adhesive powder is sprayed evenly
Shake powder quickly and efficiently
Automatic drying and color fixing

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.

As professional DTF printer supplier, we can also offer you related powder shaking machine, full series powder heating and curing machine like 30cm width, 60cm width and also 120cm width can meet your different demand.

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

Wide color gamut and high color reproduction:Print what you want, and give you a more real experience with full colors High-speed printing without manual after-sales worry-free High-speed printing mass production

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

A3 new digital offset printer, we develop and produce independently, do not use Epson L1800 and 1390 modification, our machine structure is reasonable and completely similar to industrial machine structure, using PP color management software color does not cast color.

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

Pure black when printing is generally used for smaller characters. If the full-color black (C100 M100 Y100 K100) is used, the ink concentration is too high, the ink is not easy to dry and easy to print. Therefore, it is recommended to use monochrome black (C0 M0 Y0 K100).