XP600 printhead Original F1080 printhead i3200 printhead for UV printer and DTF Printer

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

TODOjet DTF printer can offer related consumbles like hot melt powder machine,relased PET film and hot melt powder. Transfer PET film with 30cm*100m and 60cm*100m size. Hot melt powder with good adhesive effect,we have white melt powder and black melt powder for option. As to inks, we can offer high quality white pigment ink, cyan pigment ink, magenta pigment ink, yellow pigment ink, and also fluorecent color ink like fluorecent orange and fluorecent green.
As professional DTF printer manufacturer, we not only offer the machines, also offer you full solutions.

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

1. A variety of fabric printing to meet your needs
2. All fabrics such as knitted, textile, nylon, non-woven, Oxford cloth can be hot stamped
3. You can easily achieve photo-level effects

1. The curing speed of uv ink is affected by the color
2. Concentration control of black uv ink is very important
3. The viscosity of uv ink varies greatly with temperature
4. The gloss of uv ink is lower than that of oil-based ink
5. Can’t reproduce intermediate colors in uv ink

Professional team：Provide one-to-one professional pre-sale, in-sale and after-sale service. If you have any questions, please feel free to contact our customer service. We will serve you wholeheartedly.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

White Ink Heat Transfer Scheme>>
Bai Caitong comes out with an environmentally friendly paint scheme, which is a subversive heat transfer process.
It solves the problem that the direct-injection printing process is picky about fabrics, and the new heat transfer is not limited to material transfer.

RGB color model refers to the three primary colors of light: Red, Green, and Blue,the three primary color light with different proportions of the sum, can produce a variety of color light, in theory, red, green, blue light can be mixed out of all colors.

Thermal transfer heat transfer has a wide range of uses, a wide variety of processes, and the effects are constantly updated. The names are different, also called hot stamping, transfer printing, etc.

TODOjet DTF printer factory can offer you one-stop solutions like hot melt powder,PET film and pigment ink.We have different pacakge of hot melt powder like 1KG,2KG,5KG and 25KG. Also we have black hot melt powder for your option! For more DTF printer consumables,welcome contact with us!

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

Printer Button Panel: Simplified Layout and Easy-to-understand Operation
Dusting motor: stepless speed regulation shakes powder cleanly
Smoke exhaust area: can be matched with a smoking machine, which is environmentally friendly and pollution-free

The most widely used laser films on the market mainly include laser iridescent film, laser dielectric film, transparent laser film, laser dielectric film, etc.

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

Crystal label, its feature is that it can be made in small batches or even one piece, and the film can be peeled off to leave pictures and texts. In addition to good pattern effects, it also has good scratch resistance and weather resistance, which is somewhat similar to the advantages of UV printers.

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

As professional UV printer and DTF printer manufacturer, we not only offer the printers, but also provide the related consumables and spare parts like original and new F1080 xp600 print head DX6 DX10 DX11 4720 i3200 printhead for UV printer and DTF printer machine.

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

The main feature of personalized thermal transfer technology is that the transfer image is bright in color,Rich in layers, its effect is comparable to printing.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

White ink timing stirring function, every 30 minutes, the machine will automatically stir the white ink to prevent precipitation (automatic, no manual operation required)

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly