TODOjet Large format 60cm 4720 printhead T-shirt 2heads i3200 inkjet dtf printer printing machine

TODOJet 4 pcs 4720 printheads roll to roll DTF printer with fast speed, and support fluorescent color on T-shirt printing.There is no need to engrave and discharge waste and film, which effectively improves production efficiency, does not limit patterns, and is naturally hollowed out and thinner and breathable.

DTF printing is a new technology created for high-quality textile printing. The DTF of the English Direct Transfer Film includes printing the design directly on the film, and then using heat to transfer it to the garment, directly printing on the fabric, for fashion and decoration applications.

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

TODOjet is the best DTF printer PET film printer supplier in China,which can offer you full series DTF printer, from A3 size to large format size DTF printer, we can also offer you i3200 printheads printer, 4720 printhead DTF printer,and also XP600 printhead printer. Besides this, we can also offer you other consumbles such as hot melt powder, PET transfer film,poweder machine and heat press machine.

TODOJet direct film printer creat a new solution about garment printing,with both breathable vents and fluorecent colors printing function. Breathable vents can make sure the T-shirt wearing more comfortable,and fluorecent orange and green can make your T-shirt looks more special. More details about our deaktop A3 DTF printer,kindly contact with us!

High-Quality Dual Printhead
The printer has a dual print head design that lays down the colors in a blend of CMYK colors with the first printhead and then lays down the perfect amount of white under base on top of the colors in perfect alignment so that you do not have any white peeking out.
The alignment is on the film, rather than on the bumpy fabric of the shirts so it creates a crisp design edge that you can’t even get with traditional screen printing.

60CM DTF Printer
No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

This A3 DTF printer with Epson XP600 can be used to print transfer films with special DTF textile inks and powders for printing on cotton, polyester, 50/50 blends, spandex, leather and other garments. TODOjet is professional supplier that can offer related product like hot melt powder machine, pigment inks, powder and PET films.

TODOjet DTF printer can offer related consumbles like hot melt powder machine, relased PET film and hot melt powder. We have both 30cm*100m and 60cm*100m roll PET film for option, which used for cold peel transfer. You can printing direct to this film with our DTF printer. And this film is the correct micron thickness for powder shaking machine (automated curing machines).

Direct-to-Garment printing has met its rival. While DTG technology works best on cotton pre-treated fabrics, Direct-to-Film printing opens the door to a wide range of choices and is capable of printing onto non-treated cotton, silk, polyester, denim, nylon, leather, 50/50 blends, and more. Direct-to-Film printing is a method that rivals Direct-to-Garment printing. With DTF, graphics and artwork are printed onto a special coated PET film. A lightweight adhesive powder is then applied to the back of the image, allowing for the print to be transferred to numerous types of textiles, including 100% cotton, polyester, nylon, and more. This process gives businesses the ability to skip pre-treatment processes, lower costs of production, and expand their versatility.

Release film is a kind of hot stamping printing negative in the thermal transfer release film products. It belongs to the cold tearing matte product and is used in water-based white ink;
In the aspect of direct injection printing, the product is mainly made of high temperature resistant polyester film (BOPET film), which has been precisely coated for many times.

TODOjet 30cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and excellent after-sale service. We also offer wholesale price and OEM service.

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

DTF is an exciting innovation to garment field that cannot be ignored. If you have shied away from DTG printing in the past because of the pre-treatment process required when using white ink or you are tired for making plate for screen printing, DTF breaks this cycle and requires no pre-treatment but still offers the soft hand touching and good water fastness .

TODOjet New design T shirt printer consists of three parts: Direct to film printer, powder shaker, and heat transfer machine. White and color are printed at the same time. No pre-processing, no engraving, no waste discharge, direct hollowing without cutting process. Color fastness Level4 , The color will not fade after washing. New design T-shirt A3 Size For TODOjet Dtf Printer for wholesales, Please feel free to contact us !

Product features of heat transfer machine: The bottom plate is equipped with high temperature resistant foaming silicone, which can withstand temperature up to 350°C.

There is no need for plate-making—you can cost-effectively produce as little as one piece with minimal investment. This low-cost production method reduces investment in both equipment and space, making it a game-changer for the printing industry.

Intelligent DTF cutting device is specially used for PVC,leather, kraft paper,self-adhesive,TPU, reflective film and other flexible materials.

TODOjet DTF printer offer Epson XP600/F1080 and i3200-A1 printhead for option, this A3 Pro DTF heat transfer printer usually together with a powder shaker machine, and the DTF printer with rewinding device support roll to roll printing, improve the product efficiency.

Digital white color heat transfer printing machine
★No plate making ★No lettering required ★Print at will ★Easy to operate

TEXTEK A30 30cm A3 DTF Printer Powder Shaker 2024 New Epson XP600 Sticker Label Printing Machine is an ideal direct-to-film printer for your business in 2024.

printer advantage :
Front and rear arc plate heater;
Platform suction;
white ink circulation &stirring all with ink shortage alarm ;
Anti collision ofnozzle;
One key automatic cleaning;
Integrated auto-lifting ink station;
LCD + multi function operation key board

Pattern Printing
-Bright colors
-Simuitaneous color and white printing.
-Hollow patterin without cutting.

Introducing our Wholesale Price 30cm UV DTF Printer AGP F30, featuring the Epson F1080 Printhead and Integrated Laminator for Glass, Cup Wraps, Stickers, and more.

1. Select the print image and select it on the computer, you need to make the print pattern.
2. Double head heat press machine Epson double head/four head, color ink/white ink print pattern at the same time.

The TODOJet A3 DTF printer has 2 staggered EPSON XP600 print heads. Each nozzle has 6 channels, which can achieve high printing speed under small printing width. The first nozzle is used for white ink and the second is used for CMYK ink. The printer is equipped with a white ink circulation stirring system, stable printing and long life of the print head. The mechanical parts and ink system used in DTF borrow large-format printers, so the equipment is reliable and has a long service life.

Machine humanized design
Paper shortage alarm/3-stage hot and cold air intelligent drying/emergency stop emergency/automatic cleaning

Heat transfer has high requirements for the selection of ink, hot melt powder and transfer film, which is related to the quality of printing and the service life of the machine. The supporting consumables recommended by our factory are the optimal quality and the best supporting scheme.

Раванди кори мошини интиқоли гармӣ: Вақти штампкунии гармро нишон диҳед Вақте ки вақти контроллер тамом мешавад, садо садо медиҳад ва даста ба ҳолати аввала бардошта мешавад.

A3 digital offset heat press machine, small size and space saving, using EpsonXP600 original print head
The single/double nozzles are customized, the running speed is fast, and the production speed is up to 3m/h.