EPSON XP600 Printhead 300mm 30cm DTF Direct to PET film Digital inkjet A3 DTF printer for Home Use DIY

TODOjet in stock:
cold hot peel double-sided a3 a4 dtf pet heat transfer film for dtf printing direct to film
DTF white ink printer heat transfer PET film t-shirt DTF printer

Heat transfer is widely used in T-shirt printing. When choosing to customize, we should focus on the color of the pattern and the method of heat transfer, and decide the way to tear off the film. Now there are mostly two ways in the market: hot peeling and cold peeling. Next, we will analyze these two ways from the following aspects: composition of the ingredient, pressing temperature, pressing time, film tearing time, glossiness and so on.

Application scope of TODOjet white ink offset heat press printer solution:

Personalized pattern T-shirts, finished clothes, sweaters, clothing sets, luggage pieces, leather printing, jeans, team clothes, work clothes, class clothes, group clothes, school bags, luggage pieces, hats, home textile products…

DTF Printer, is a new technology, which refers to the heat transfer equipment heated to a certain temperature in a few minutes, and then the image on the paper more realistically transfer to porcelain cups, porcelain plates, porcelain plate, clothes, metal and other materials on a more special processing process.

DTF ink storage environment:
DTF ink needs to be placed in a cool place, must not be placed in direct sunlight, not exposed to the sun, or placed in a place where the temperature is too high or too low, otherwise it will cause the unopened ink to deteriorate. In addition, the shelf life of DTF ink is 12 months when stored in a standard environment.

All-in-one machine for heat transfer and powder shaking:
1.Convenient, high efficiency and low cost: One-stop hollow printing, no cutting plotter, laminating machine, hollow machine, no waste discharge, time and labor-saving.
2. Good effect: the pattern is soft to the touch, washable and stretchable, and the wet and dry fastness reaches level 4-5.

Our Custom Full Color DIY T-shirt transfers are so easy to use!
No more weeding or layering vinyl, no more limitations on colors, or fabrics. They can be used in any color or fabric! Simply press, cool, and peel!
this bundle includes the printer, software, powder dryer, printhead, and tech support!
if you have any issues you can contact a support technician and if it is available they can log into your pc to assist you with settings

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

Digital printer prints on the pattern with the pigment ink and white ink on the Pet film.
Spray the adhesive powder on the pattern and dry the powder.
And transfer the pattern to the final object by the heat transfer machine.

Q: What does after-sales service include?
A: The company provides technical support for a long time, and provides “lifelong technical and training services” for each customer to help customers solve various problems encountered in the production process in real time, and feedback the technicians to propose solutions at the first time. Try to ensure that your production work is not delayed.

DTF is an exciting innovation to garment field that cannot be ignored. If you have shied away from DTG printing in the past because of the pre-treatment process required when using white ink or you are tired for making plate for screen printing, DTF breaks this cycle and requires no pre-treatment but still offers the soft hand touching and good water fastness .

1. A variety of fabric printing to meet your needs
2. All fabrics such as knitted, textile, nylon, non-woven, Oxford cloth can be hot stamped
3. You can easily achieve photo-level effects

You could try our A3 DTF Printer. Maintenance method of T-shirt and cotton textile after transfer printing?
1. Just transferred T blood will have a little hard, the feeling, you will become soft after washing.
2 The newly processed T-shirt must be cleaned up after 2 hours. Turn the clothes over to the reverse side and wash them.
3 Do not rub the surface of the T-shirt (the surface material does not attach dirt).
4 Do not wash with a detergent containing bleach.
5. Wash with warm or cold water below 40 C.
6 Try not to use a washing machine.
7 After washing, do not use the clothes dryer to shake dry.
8 Dry naturally and do not twist your clothes. Don’t expose your T-shirt in the sun.
9. If the clothes need to be scalded flat; dry can use medium temperature steam ironing (including elastic fiber can not be irat high temperature, so as not to damage the tissue structure of elastic fiber. influence
Clothing elasticity effect), do not iron directly on the pattern.
10 After Ironing. Do not plug clothings into narrow space, can use coat hanger county hang or flat spread, in order to maintain clothings flat appearance.

● Automatic A3 printing, glueing and curing line for printing on light, color and dark T-shirts.
● Printing is carried out on a special film with white ink in a mirror image, after which the finished film is transferred to a T-shirt in a heat press
● Manual application of glue is possible, however, for printing large runs it is preferable to use a roll-to-roll printing line
● The resulting image is highly resistant to washing, up to 25 washes
● The image is bright and saturated, pleasant to the touch
● Professional software ensures correct color reproduction
● Durable printer design allows up to 12 A3 T-shirts per hour

Fast printing speed Direct to Film Printer A3 DTG heat transfer inkjet printer with 5 color ink white ink,The image quality is comparable to Class A heat transfer. Clothing digital printing is actually the digital direct injection in the industry, and the pattern effect of direct injection is also good. Now there are small digital direct injection machines, which are relatively simple to operate. They are suitable for making clothing DIY, team clothes and the like.

Compared with the DTG direct to garment printer, this DTF solution is flexible in positioning due to its printing on PET film first, and then heat press on fabrics,which is suitable for mass production of T-shirt Logo Label printing.This A3 DTF printer with new technology—-no need make plate,no need for pre-treatment and can be used for any garments printing.

New coming DTF PET Film Printing Machine with hot melt powder Shaking machine with new technology for garment printing. When the film is dried out, it can be used to transfer print onto the garment. Which can to be press on both dark and light Garments like cotton, polyester, spandex, leather, nylon and more. 

TEXTEK A30 30cm A3 DTF Printer Dual Epson XP600 6 Colour Ink Sticker Label Printer T Shirt Garment 2024 is a versatile direct to film printer. Powered by dual Epson XP600 printheads, it’s not only able to print your design with CMYK+W ink combo, but also has extra ink cartridges for LC+LM or Fr+Fg ink. The A30 is an easy-to-use and budget-friendly DTF printer that you will want to give a try.

We will solve your “trouble”:

Printing method: digital heat transfer,
No plate making, simple process, short timeliness, low cost, low operation difficulty and high cost performance.

In fact, white ink appeared very early, but also by everyone’s high hopes, but its direct-jet process as a whole has not progressed much. With the development of industry technology, as well as the market demand, we are seeking more in line with the production of white ink direct spraying solutions. The development of many years of cotton coating digital direct-jet process, is currently the digital printing inside the most variables, but its color, fastness, feel are different degrees of improvement, which, the most innovative enhancements, is a combination of screen printing paste process and white ink direct-jet process, the two process solutions to a large extent, to enhance the coating direct-jet process market share.

1. This equipment is a new generation of digital revolution, pioneering and leading a new digital heat transfer process.
2. This equipment makes up for the shortcomings of the existing process. It only needs printing + pressing, and the printing can be done in two steps.

Wish all of you a happy Christmas season!
TODOjet offers whole series full size of DTF Printer, which will meet your needs from all aspects. Supporting provide premium quality DTF ink , they are specially formulated direct to film printing inks designed to work with a wide variety of DTF printers. Also provide premium hot melt powder with high binding characteristics and quality PET films that work with a wide variety of fabrics. 

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

With professional equipment and a professional team, we have always strictly required every detail of the work to establish and maintain customers’ products and services with a warm working attitude and perfect information.

TODOjet new A3 DTF printer with two Epson F1080 (XP600) printhead, support fluorescent color printing like orange and green. Printing speed can reach to 4 sqm/h (about 13.5 m length).This direct to film printer no limit of fabric materials printing, suitable for any garment printing shop.

Adopt 1080 printing nozzle, color is more fulland delicate, stable print is clear
inkjet is smooth with white membrane circulation system
Solve the problem of nozzle blockage

DTF Printer is a hot topic in the printing industry recently. When buying a white ink heat press machine, you should pay attention to the following aspects. 1. Look at the user evaluation. The user evaluation is very good. The general technical and after-sales service of digital printing machine manufacturers are guaranteed. Second, look at the high cost performance, this key is considered from the speed and price of the pure cotton direct-injection digital printing machine.

Naujos technologijos skaitmeninė ofsetinė šilumos perdavimo spausdinimo programa, ekrano ekrano spalva, nepriklausoma programinės įrangos kūrimas, stabilesnis, taupantis varginantis procesas, karštas štampavimas po spausdinimo , neribotas audinių kiekis, paprastas valdymas. Pogarantinio aptarnavimo garantija, technologija buvo susieta, niekada nepralenkta!

This DTF printer Epson XP600 can be used to print PET films and transfer on cotton, polyester,nylon,canvas leather and other fabrics. A3 size DTF printer is very popular in garment industry.T-shirt Printing Machine works with PET Film Transfer ink + Hot Melt Powder + PET Film Transfer.Customers who want to start new business prefer the DTF printer since it don’t need a heavy investment and can get back cost soon.

DTF Printer-A3
CMYK+ Fluorescent Color+ White
Printhead: 2PCS EPSON F1080
Printing width: 30cm
Printing Speed: 4.5sqm/h (about 15m/h)
Software: Maintop/Photoprint
Ink type: Pigment Ink
RIP: Maintop,RIPrint,CADlink,Photoprint