2024 Best-Selling 30cm DTF Printer for PET Film Heat Transfer: High-Quality Direct-to-Film Printing Solutions

TODOjet A3 DTF Printer/DTF Transfer Printer Advantages:
1.The accuracy of the platform is ±2 wires (0.02mm) to ensure the flatness of the platform to the greatest extent.
2. The machine is equipped with an ink shortage alarm, which will alarm when the ink is below a certain level, reminding the user to add ink.
3.There are 2 independent protective sleeves in the ink chain to protect the ink tube and the flat wire respectively. There is a cable protection cover at the opening of the machine to reduce wear and prolong the service life.

T-shirt pigment ink digital printing solution
1. Simple and easy to operate
2. Applicable to T-shirts of different materials
3. No need to cut and peel
4. Good color fastness

High precision, high efficiency, more delicate colors, DIY personalized customization, wide application, easy operation, easy maintenance, white ink circulation system, smoother ink output, and extended print head life.

Product features of heat transfer machine: The bottom plate is equipped with high temperature resistant foaming silicone, which can withstand temperature up to 350°C.

Our Custom Full Color DIY T-shirt transfers are so easy to use!
No more weeding or layering vinyl, no more limitations on colors, or fabrics. They can be used in any color or fabric! Simply press, cool, and peel!
this bundle includes the printer, software, powder dryer, printhead, and tech support!
if you have any issues you can contact a support technician and if it is available they can log into your pc to assist you with settings

DTF is also referred to as Direct Transfer Film, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates). There are many compatible fabrics including cotton, nylon, leather, and polyesters. This is unlike DTG technology which only works on cotton fabrics.

TODOJet textile printer-new equipment in 2023.
DTF technology has been around for several years, but it became very common in the last year. The essence of this technology is to use textile pigment ink to directly print on a special PET film. After printing, the film enters the powder shaker, sprays special powder on the film, and then the film is dried after spraying, and then the film with the print pattern is wound on the receiving device . This technology allows you to print images at high speed without placing the product on the desktop alone, you just need to place the film, create a layout with the image and start printing.

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

TODOjet white ink heat transfer printer application range:
Personalized pattern T-shirts, finished clothes, sweaters, clothing sets, luggage pieces, leather printing, jeans, team uniforms, work clothes, class uniforms, group clothing… TODOjet digital white ink heat transfer printer, printing software factory research and development, long-term printing progress is not biased The alignment of white color is finer, and the coloring effect is more ideal.

TODOjet is one of the best DTF printer PET film printer suppliers in China, which can offer you full series DTF printer, from A3 size to large format size DTF printer, we can also offer you i3200 printheads printer, 4720 printhead DTF printer, and also XP600 printhead printer. Besides this, we can also offer you other consumables such as hot melt powder, PET transfer film, powder machine and heat press machine. Our A3 DTF will satisfy the wholesale business and the retail business.

E30 DTF Printer: High-Speed, High-Quality Printing Solution

The E30 DTF Printer is a cutting-edge solution for businesses looking to streamline their printing process while maintaining high standards of quality. With advanced features designed to improve print performance, durability, and operational efficiency, the E30 offers a reliable and cost-effective solution for a variety of printing applications.

In the clothing industry, white ink heat transfer printers are regarded as very competitive weapons. Through AGP DTF printers, designers can better display clothing printing creativity and achieve better printing effects. Clothing manufacturers can also quickly launch new clothing products with white ink heat transfer technology, catch up with the trend and meet the needs of the clothing market.

1. The cost of consumables is less than 30 yuan / square
2. The pattern is ultra-thin, soft and elastic
3.Suitable for any fabrics, dark and light colored fabrics to do together

TODOjet can offer wholesale price and OEM service. Recently this 30cm A3 DTF printer is really popular, two heads with fast speed and more stable than L1800 modified printer.

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

DTF Printer is a hot topic in the printing industry recently. When buying a white ink heat press machine, you should pay attention to the following aspects. 1. Look at the user evaluation. The user evaluation is very good. The general technical and after-sales service of digital printing machine manufacturers are guaranteed. Second, look at the high cost performance, this key is considered from the speed and price of the pure cotton direct-injection digital printing machine.

DTF printer is a new trend in textile printing field,and the market is growing fast cently.You can see many distributors show this PET film printer at FESPA exhibition,and other exhibition like C printin Spain! TODOjet as professional factory can offer you different size DTF printers.

It is recommended to use the TODOjet A3 DTF Pro Printer 6-color fluorescent green fluorescent yellow new solution with fast speed and high quality. After printing, wait for the ink to dry, and then pass the thermal transfer.

Best DTF printer quality,rich industry experience.TODOjet is one of the best DTF printer PET film printer suppliers in China,which can offer you full series DTF printer, from A3 size to large format size DTF printer, we can also offer you i3200 printheads printer, 4720 printhead DTF printer,and also XP600 printhead printer. Besides this, we can also offer you other consumbles such as hot melt powder, PET transfer film,poweder machine and heat press machine.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

TODOJet DTF printer creat a new solution about garment printing,compare to traditional transferring way, the new one can be printed with breathable vent, which can make sure the T-shirt wearing more comfortable. More solution about PET transfer film printing, kindly contact with us +86 150 9339 4741.

printer advantage :
Front and rear arc plate heater;
Platform suction;
white ink circulation &stirring all with ink shortage alarm ;
Anti collision ofnozzle;
One key automatic cleaning;
Integrated auto-lifting ink station;
LCD + multi function operation key board

Automatic rewinding saves time and cost: automatic rewinding operation saves time and labor and reduces costs after assembling the synchronous rewinding device after drying.

1.Stable production performance can save costs
2.Simple process, high-definition effect
3.Personalized customization, no need for plate making

Nowadays,this A3 DTF Printer is very popular.The T-shirt printing machine can apply on plenty of items, such as T-shirt, canvas bag, pen, apson,gift, plastic cup and so on.

5 things to know about DTF technology
Direct film printing is a unique printing technology that involves printing designs onto special films for transfer to garments. DTF printing is a thermal transfer process with the ability to last as long as traditional screen printing. Below, we’ll discuss five things you should know before implementing DTF technology in your business.

White ink automatic circulation/stirring
White ink is automatically circulated/stirred, effectively suppressing ink precipitation and causing nozzle blockage, and achieving stable white ink output after power-on printing.

Release film is a kind of hot stamping printing negative in the thermal transfer release film products. It belongs to the cold tearing matte product and is used in water-based white ink;
In the aspect of direct injection printing, the product is mainly made of high temperature resistant polyester film (BOPET film), which has been precisely coated for many times.

Clothes Pet Film Printer
– CMYK + White color scheme
– No need for a primer
– Long lasting image is pleasant to the touch
– Final fixation of the image in a heat press

Sublimation Printing: Originally, this involved printing patterns onto special transfer paper, followed by cutting using an edge finding plotter, manual hollowing out, and finally transferring the design onto fabric using a heat press machine. However, sublimation is known for its low efficiency and less-than-ideal tactile feel.