Best-Selling High-quality Textile Pigment CMYK White Ink DTF Printer Powder Shaker Machine for Transferring on Bags Shoes Sleeve

1. Simple control buttons
The key functions are clear and easy to operate, just one touch
2. Four-color printing
The colors are more vivid and rich, and the hot stamping effect is good

No manual requirements, accurate positioning of white ink and color ink, environmental protection and no waste discharge
1. No need to stroke, no need to hollow out, no need to open the board, one piece of printing
2. Small footprint, one-person operation, short cycle, fast delivery, high temperature resistance and washing resistance
3, suitable for any fabric, dark and light-colored cloth together

Imported high precision guide rail
The guide rails and sliders are imported to ensure the equipment runs smoothly with high precision, low noise and longer service life

Do you know how to print reflective color on T-shirt or other fabrics with DTF printer? Here we can offer you a good solution. 4 printheads DTF printer support nine colors CMYK+W+FM+FO+FY+FG. Superb effect of fluorescent orange, fluorescent green,fluorescent magenta and fluorescent yellow.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Personlig udskrivning: meget velegnet til forskellige personlige farveudskrivningstjenester såsom T-shirts, puder (sæt), indkøbsposer, forklæder, handsker, bomuld strømper, lommetørklæder osv. Det har stærk stabilitet og løser mange mangler ved de eksisterende flatbed-printere. Eftersalgsservice garanti: professionel F & U, produktion og eftersalgsservice. Egnet til udskrivning på ethvert materiale og materiale.

What is difference between DTF printer and DTG printer ?

DTF means direct to film printing,its an alternative printing process to DTG printer.

As we all know that DTG is direct to garment printer,which is suitable for cotton fabrics printing,such as cotton T-shirt, POLO shirt printing. And DTF printer is suitable for all non-fabrics printing,such as polyester, hats printing,shoes printing,canvas printing.

DTF printer
The machine can go directly to the film printer on fabrics, textiles, and fabrics.
Reliable quality.
We also provide PET film, pigment ink and powder.
1. Entered this field more than 10 years
2. Fast delivery,10-15 working days for 20″/40″ container
3. OEM/ODM professional experience
4. Professional development engineers, designers and quality management system guaranteed
5. Production over 1000pcs machines each month
6. Products meet ISO,CE standard test

Adopt 1080 printing nozzle, color is more fulland delicate, stable print is clear
inkjet is smooth with white membrane circulation system
Solve the problem of nozzle blockage

DTF means direct to film printing, it’s an alternative printing process to DTG printer. As we all know that DTG is direct to garment printer,which is suitable for cotton fabrics printing, such as cotton T-shirt, POLO shirt printing. And DTF printer is suitable for all non-cotton fabrics printing,such as polyester, hat printing,shoes printing,canvas printing.

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

TODOjet is a professional UV printer and DTF printer factory in China. We offer high quality machine and good after-sale service. We offer wholesale price and OEM service. Recently this 60cm DTF printer is really popular, two heads with fast speed and more stable than L1800 modified printer.

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

New generation DTF PET Film Printing Machine with hot melt powder Shaking machine with new technology for garment printing. When the film is dried out, it can be used to transfer print onto the garment. Which can to be press on both dark and light Garments like cotton, polyester, spandex, leather, nylon and more.

Brand-new nozzle installation, using self-developed control board, solves the problem of feeding film and thick paper, and can not feed paper. The rear adopts a rolling material device, combined with the offset printing scheme, which is easy to operate. In addition, there is a matching offset white ink printing software.

DTF Advantages
Cost-effective: can save up to 50% white ink; supplies are also significantly more affordable.Easy operation: DTF allows you to apply the artwork on difficult/awkward parts of the garment or fabric with ease. High stretch-ability and soft hand feel.

Its printing process is simple, easy to operate, the required materials are economical and easy to obtain, and it can be widely printed on various substrates, such as knitted T-shirts, denim, plush, toys, shoes, backpacks, various nylon caps Wait.

It is worth noting that the materials that can be printed on Koch’s digital heat transfer include cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA, etc. There is basically no limitation on fabrics.

Light-colored fabric printing effect:
digital printing
bright colors
Simple and fast
No waste
Hollow and breathable
—————————————————-
Dark fabric printing effect:
digital printing
Screen Overprinting
No need to cut
No waste
soft and delicate
Washable and scrub-resistant

No limit on fabric materials
No need pre-coating
CMYK+ White (Fluorescent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint/RIIN/CAD Link

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

Hansen board: Overvoltage protection, stable system, highly integrated functions, and a protection circuit greatly reduces the chance of burning the board during short circuit!

The TODOJet A3 DTF printer has 2 staggered EPSON XP600 print heads. Each nozzle has 6 channels, which can achieve high printing speed under small printing width. The first nozzle is used for white ink and the second is used for CMYK ink. The printer is equipped with a white ink circulation stirring system, stable printing and long life of the print head. The mechanical parts and ink system used in DTF borrow large-format printers, so the equipment is reliable and has a long service life.

TODOjet A3 DTF printer is a classical mode for almost all fabric printing needs. It’s small-sized, cost-effective, easy to operate and profitable. Cotton, nylon, polyester, silk, demin, canvas, blends etc are suitable for A3 DTF printer.

CMYK+ Fluorescent Orange + Fluorescent Green + White
No limit of fabric materials
No need pre-coating
No need plate making
No need contour cutting
Environment-friendly pigment ink
Small invest, large benefit

What is the difference between a DTF T-shirt printer and a DTG clothes printer machine?Which one do you prefer?Let’s find more details in this article.It was obvious that DTG is direct to garment printer,which is mainly used for printing T-shirts with cotton fabrics.If we use DTG printer to print no cotton clothing fabrics, the clothes color will fade gradually.The effect is not perfect.While DTF printers can print on all fabrics, such as hat ,shoes ,canvas,T-shirts, aprons and mouse pad.In short, DTF printer is more popular with the changing market trend.

TODOjet A3 DTF printer is a classical mode for almost all fabric printing needs. It’s small-sized, cost-effective, easy to operate and profitable. Cotton, nylon, polyester, silk, demin, canvas, blends etc are suitable for A3 DTF printer.

Wide color gamut and high color reproduction:Print what you want, and give you a more real experience with full colors High-speed printing without manual after-sales worry-free High-speed printing mass production

TODOJet textile printer-new equipment in 2023.
DTF technology has been around for several years, but it became very common in the last year. The essence of this technology is to use textile pigment ink to directly print on a special PET film. After printing, the film enters the powder shaker, sprays special powder on the film, and then the film is dried after spraying, and then the film with the print pattern is wound on the receiving device . This technology allows you to print images at high speed without placing the product on the desktop alone, you just need to place the film, create a layout with the image and start printing.